Shop All

The Graco GC1916 Probler 2 head is the central body of the Graco/GlasCraft Probler P2 dispense gun. The side blocks, mix chamber module, air cylinder and handle all mount to the head, so a damaged head (stripped threads, cracks or crossover damage) is typically...

The Graco GC1898 1-3/8 in. air piston is one of the two air pistons inside the Probler P2 gun's air cylinder. Air pressure acting on the pistons moves the mix chamber to open and close the gun, so a worn piston can lead to...

The Graco GC1899 is the 1-1/2 in. air piston for the Graco/GlasCraft Probler P2 dispense gun. Along with the 1-3/8 in. piston (GC1898), it forms the gun's air cylinder, which drives the mix chamber open and closed each time you trigger.Features Restores positive gun...

The ArmorThane E-Z Gun air cap is the front air cap for the ArmorThane E-Z Gun low-pressure spray gun. A clean, undamaged air cap is essential for consistent atomization, so replace it if it is dented, clogged with cured material or cross-threaded.Features Genuine ArmorThane...

The Graco GC1900 cylinder spacer sits between the air pistons in the Probler P2 gun's air cylinder. It positions the 1-3/8 in. (GC1898) and 1-1/2 in. (GC1899) air pistons so the gun opens and closes the mix chamber correctly.Features Keeps air pistons correctly positioned...

The Graco GC2248 socket head cap screw is used four times in each Graco/GlasCraft Probler P2 and P2 Elite dispense gun. Having a set of spares means a stripped or dropped screw will not stop a gun rebuild on the job site.Features Four used...

The Graco GC1901 air valve insert is part of the air valve in the Graco/GlasCraft Probler P2 dispense gun. It helps route air to the gun's air pistons, so a worn insert can cause air leakage and inconsistent open/close action.Features Restores proper air valve...

The Graco GC0126 air switch tube is the body the air switch spool slides in, part of the Probler P2 air switch assembly (GC0128). A cracked or worn tube can leak air or let the switch bind.Features Replace only the tube when the spool...

The Graco GC0127 air switch spool is the moving spool inside the Probler P2 air switch assembly (GC0128). It slides within the air switch tube (GC0126) to control air to the gun.Features Replace just the spool when the tube is still good Helps cure...

The Graco GC0128 air switch assembly controls air flow on the Graco/GlasCraft Probler P2 dispense gun. Graco's parts list shows the assembly made up of the air switch tube (GC0126), air switch spool (GC0127) and o-rings, including two 106555 o-rings.Features Complete switch assembly for...

The PMC Xtreme piston assembly is the air piston that drives the PMC Xtreme air-purge spray gun open and closed. The trigger's spool valve routes air to the front or rear of this piston, which moves the mixing chamber, so a worn piston or...

The Graco GC1923 is a small compression spring used in the Graco/GlasCraft Probler P2 family, listed as two per gun in the P2, P2 Elite and Auto Probler P2 parts lists. A weak or broken spring can keep the check function from seating properly.Features...

The Graco GC1904 check valve filter is the check valve and filter assembly used in the Graco/GlasCraft Probler P2 Elite dispense gun, which takes two (one per side). It screens incoming material and helps stop crossover between the A and B sides.Features Filters material...

This PMC spool valve liner (stock GUN-LSV2) is the stationary sleeve the trigger spool slides in on PMC air-purge spray guns. When it wears, air bypasses the spool and the gun may open or close slowly, so replacing the liner with the spool is...

The spool valve rebuild kit (GUN-SVRK) contains replacement parts for servicing the spool valve in a plural-component spray gun handle. The spool valve directs trigger air to open and close the gun, so worn parts show up as air leaks, a sticky trigger or...

The PMC air cylinder rebuild kit supplies replacement seals and wear parts for a PMC air cylinder.Features Restores sealing and smooth cylinder travel Replace when the cylinder leaks air or moves sluggishly PMC replacement kit Specifications Store SKU: KT-05025 Brand: PMC Please call ArmorThane...

The PMC Xtreme aluminum block (PMC 203290, Gun Block, CV, Xtreme, AL) is the main fluid block of the PMC Xtreme air-purge spray gun. It carries the A and R side ports and check valves that feed material to the mixing chamber, and the...

The 30:1 A/R PHX Pump (EQU-PHX30) is part of ArmorThane's high-pressure spray equipment lineup for polyurea and polyurethane applicators. Specifications Stock number: EQU-PHX30 Ratio (as listed): 30:1 Compatibility Because pump configurations vary by machine, please call ArmorThane at (417) 831-5090 with your equipment model...

The Graco GC0259 check valve ball is a 1/4 in. diameter, 302 stainless steel ball found in the Probler P2, P2 Elite and Auto Probler P2 parts lists. It is small, easily lost during cleaning, and important for the gun to function correctly.Features Corrosion-resistant...

The PMC spool valve (stock GUN-SV) is the moving part of the trigger air valve on PMC air-purge spray guns. When you pull the trigger, the spool shifts inside its liner and routes air to the front or rear of the air piston, opening...

The GUN-LSV spool valve liner is a replacement part for the trigger air valve of PMC air-purge spray guns. The spool rides inside the liner and directs air to the front or rear of the air piston, opening and closing the mixing chamber as...

This Graco Probler P2 side seal kit is built around the GC2498 stainless steel side seal used on the Graco (GlasCraft) Probler P2, an air-purge plural-component dispense gun for non-flammable spray foam and polyurea. Graco's own P2 side seal kit, part number GC1946, contains...