Protective Coatings Sprayers

The Graco Complete XM PFP System (262869) is a ready-to-spray plural-component package for passive fire protection (PFP) coatings, including a 50 ft (15.2 m) dual heated hose, mix manifold, 17 ft (5.2 m) static mix line, 30:1 flush pump and XHF gun with 429...

The Graco XM70 Skid System, Non-Hazardous, with Water Jacketed Hose and 25 Gallon Heated Hoppers, 480V (XM7H2W) is a high-pressure plural-component sprayer for demanding, high-viscosity protective coatings.Pick the XM70 when material viscosity, hose length or film build calls for more pressure than the XM50s...

The Graco XM50s Skid System, Non-Hazardous, with Electric Heated Hose and 25 Gallon Heated Hoppers, 240V (XM5M2E) is a skid-mounted plural-component sprayer for high-performance protective coatings.It is aimed at applicators spraying high-solids epoxies, urethanes and similar two-component protective coatings.Features Skid mount for truck, trailer...

The Graco XP70 Cart System, Hazardous Location, 1:1 Bare, 240V (571102) is the high-pressure member of the XP family, rated to 7250 psi for thick, high-solids two-component coatings.The bare configuration lets you add the heaters, hoses and gun that suit your material and job.Features...

The Graco XP50 Cart System, Hazardous Location, 2:1 with Primary Heaters and Hose Heat, 240V (575206) sprays two-component protective coatings at a fixed 2:1 ratio in hazardous-location environments.XP sprayers proportion and mix two-component epoxies and polyurethanes, and heat helps bring viscous materials to spray...

The Graco XP50 Cart System, Non-Hazardous, 1:1 with Primary Heaters and Hose Heat, 240V (575107) is a heated plural-component sprayer for 1:1 epoxies, urethanes and other two-part coatings.Heat on both the primary side and the hose lowers viscosity for better atomization and a more...

The Graco 15:1 Merkur ES Air Assisted Package, 0.4 gpm (1.5 lpm), standard mount, PerformAA 15 gun (24F151) is an air-powered finishing package for shops that need a fine finish with good transfer efficiency.Air-assisted airless spraying combines airless atomization with a little atomizing air...

The Graco 28:1 Merkur Airless Package, 2 gpm (7.5 lpm) fluid flow, Cart Mount (G28C03) is an air-driven airless sprayer for industrial and protective coatings, supplied ready to connect to shop air.The 28:1 ratio multiplies incoming air pressure to fluid pressure, reaching up to...

The Graco 30:1 Merkur Airless Package, 1.2 gpm (4.5 lpm) flow, Cart Mount (G30C85) is a compact, air-powered airless sprayer for industrial and protective coating work at up to 3000 psi.A 30:1 ratio means every 100 psi of inlet air produces up to 3000...

The Graco King E-Max XT 70:1 Electric Airless Sprayer, Protective Coatings Complete (2009110) brings King-class pressure to jobs where compressed air is limited, using a brushless electric XT motor instead of an air motor. Features High-torque, low-RPM brushless XT motor with a zero-maintenance design...

The Graco King E-Max XT 60:1 Electric Airless Sprayer, Protective Coatings Complete (2009108) brings King-class pressure to jobs where compressed air is limited, using a brushless electric XT motor instead of an air motor. Features High-torque, low-RPM brushless XT motor with a zero-maintenance design...

The Graco King E-Max XT 40:1 Electric Airless Sprayer, Protective Coatings Complete (2009106) brings King-class pressure to jobs where compressed air is limited, using a brushless electric XT motor instead of an air motor. Features High-torque, low-RPM brushless XT motor with a zero-maintenance design...

The Graco King E70 Heavy Duty Cart sprayer (273746) is an electric airless package for protective coatings, running on 120V/30A or 240V/20A single-phase power with no compressor required. Features 115cc Xtreme Duty lower with integrated filter Runs on a 5 kW (minimum) generator for...

The Graco King E60 Heavy Duty Cart sprayer (273752) is an electric airless package for protective coatings, running on 120V/30A or 240V/20A single-phase power with no compressor required. Features 145cc Xtreme Duty lower with integrated filter Runs on a 5 kW (minimum) generator for...

The Graco Contractor King 70:1 Air Powered Airless Sprayer (279014) delivers up to 7250 psi for heavy protective coatings, in a portable cart package that one applicator can maneuver. Features Endurance lower with QuickChange design for fast pump service XL6500 air motor Chromium-plated welded-steel...

The Graco Contractor King 60:1 Air Powered Airless Sprayer (279011) is a complete, cart-mounted package for applying protective coatings at up to 6000 psi, built to be moved around the job site by one person. Features Endurance pump with QuickChange design, Chromex rod and...

The Graco King 90:1 Sprayer (K90FH1) combines the XL6500 air motor with a 145cc lower to reach 7250 psi, giving applicators the pressure needed for high-viscosity protective coatings. Features Redesigned poppets and external pilot lines virtually eliminate pilot valve freezing Up to 70% lower...

The Graco King 60:1 Sprayer (K60FH1) is a complete air-powered airless rig for high-build protective coatings, rated to 6000 psi and delivered ready to spray on a heavy-duty cart. Features XL6500 high-performance air motor: 50% fewer parts and 145% higher exhaust capacity for smoother...

The Graco King 30:1 Sprayer (K30FH1) is a complete air-powered airless package for protective coatings, pairing the XL3400 air motor with a 220cc Xtreme lower and integrated fluid filter on a heavy-duty cart. Features XL air motor with 50% fewer parts than the previous...