Spray Equipment

The PMC Xtreme air-purge spray gun with 00 chamber (PMC 202718, Xtreme w/00 chamber/PCT pkg) is a plural-component gun for spray foam and polyurea coatings. PMC built the Xtreme by combining the most useful features of its AP-2 and AP-3 guns, and the 00...

Use this Water-Tight Toggle Switch Cover when a job calls for a part that seals a toggle switch against water and dirt. Contact ArmorThane for help confirming fit before ordering.Features Helps keep water, overspray and dirt out of toggle switches Flexible cover still lets...

This Local / Remote Selector Switch selects between local and remote control on an equipment control panel. Contact ArmorThane for help confirming fit before ordering.Features Lets the operator choose between local and remote control Replacement part for equipment control panels Stocked by ArmorThane with...

The ArmorThane 1/4" air regulator sets and maintains downstream air pressure for pneumatic equipment, with 1/4" connections.Features Adjustable air pressure control 1/4" port size Steady air supply for consistent spraying Specifications Port size: 1/4" Type: Compressed air pressure regulator Stock number: FIT207 Typical usesAir...

The PMC Premier is a high-output hydraulic spray foam proportioner with a touch screen, remote capability and job data recording for residential and commercial work. Features Touch screen and remote capabilities Data recording and reports in an intuitive interface 18 kW total dual heater...

The PMC Premier X is a 3,500 psi high-output proportioner for polyurea waterproofing, decking and protective liners. Features 2.8 gal/min output at up to 3,500 psi 21 kW total dual heater 120 V hose heat up to 410 ft Specifications Model: Premier X (SKU...

The PMC PK-25 is a compact air-driven proportioner suited to residential spray foam insulation and polyurethane slab lifting. Features High-efficiency air motor drive 7.5 kW single heater 70 V hose heat for up to 210 ft Compact 300 lb footprint for smaller rigs Specifications...

The Graco Reactor 3 H-XP3 is the highest-output hydraulic Reactor 3 for polyurea and protective coatings, combining R3 hybrid heaters, the Advanced Display Module and Reactor Connect remote monitoring.Features Graco R3 hybrid heaters Advanced Display Module (ADM) touchscreen Reactor Connect remote monitoring Available in...

The Graco Reactor 3 E-XP1 is a polyurea system for customers focused on smaller jobs or just entering the business – a great starter machine, and a good fit for tempered climates thanks to its smaller heater.Features Active ISO lube system with peristaltic pump...

The Graco XM™ PFP Plural-Component Sprayer is built for passive fire protection (PFP) coatings, which insulate structural steel from high temperatures and buy time for evacuation. Data reporting lets you confirm epoxy intumescent coatings were sprayed on-ratio, to the manufacturer's requirements.Features Handles two-part materials...

The PMC Premier Mach 2 is a patent-pending dual-gun proportioner that lets two applicators spray at the same time while maintaining on-ratio pressure. Features Sprays two guns simultaneously on ratio Supports up to two 02 (or equivalent) chambers 18 kW dual heater with dual...

The Graco Reactor E-XP1 electric polyurea proportioner has been discontinued by Graco. ArmorThane still supplies parts, rebuild kits and service support for it. Machine not available – parts only.The E-XP1 was Graco's entry-level electric coatings proportioner for polyurea, with a hybrid heater and heated...

The PMC PH-40 is a high-output 2,000 psi hydraulic proportioner for spray foam roofing and commercial insulation. Features Up to 40 lb/min for large commercial jobs 15 to 21 kW total dual heater 120 V hose heat supports up to 410 ft of hose...

The PMC PH-55 is PMC's highest-output foam proportioner, rated to 2,500 psi and 55 lb/min for large roofing and commercial projects. Features 55 lb/min output for maximum production 21 kW total heat 120 V hose heat up to 410 ft Specifications Model: PH-55 (SKU...

The Graco Reactor 3 H-50 is Graco's high-output hydraulic Reactor 3 proportioner for spray foam insulation and roofing, pairing R3 hybrid heaters with the Advanced Display Module and Reactor Connect.Features Graco R3 hybrid heaters Advanced Display Module (ADM) touchscreen Reactor Connect remote monitoring Available...

The Graco Reactor 2 H-30 is a hydraulic proportioner for everything from residential foam insulation to high-volume commercial roofing. Its heater warms material quickly and holds set points so you can spray at maximum flow.Features Dependable, robust and durable hydraulic drive Tracks, monitors and...

The Graco Reactor 2 H-40 is a hydraulic proportioner for getting large spray foam jobs done faster. Its heater warms material quickly and maintains set points at high flow rates.Features Hydraulic drive – dependable, robust and durable Reactor Connect app standard: monitor rigs and...

The Graco Reactor H-25 hydraulic spray foam proportioner has been discontinued by Graco. ArmorThane still supplies parts, rebuild kits and service support for it. Machine not available – parts only.The H-25 was the entry model of Graco's original hydraulic Reactor line, offering adjustable pressure...

The Graco Reactor E-XP2 electric polyurea proportioner has been discontinued by Graco. ArmorThane still supplies parts, rebuild kits and service support for it. Machine not available – parts only.The E-XP2 was the higher-output electric Reactor for polyurea and coatings, offering material data and system...

The Graco Reactor 3 E-XP2 is a polyurea system for customers who need more output and capability – ideal for medium to large jobs and the workhorse of a coatings fleet.Features Active ISO lube system with peristaltic pump and automatic timed circulation for longer...

The Graco Reactor E-20 electric spray foam proportioner has been discontinued by Graco. ArmorThane still supplies parts, rebuild kits and service support for it. Machine not available – parts only.The E-20 was Graco's low- to medium-output electric foam proportioner, with hybrid heaters, circulation valves...

The Graco Reactor 2 H-XP3 is the highest-output hydraulic coatings proportioner in the Reactor 2 line, built for large polyurea projects and in-plant production.Features Dependable hydraulic drive for high-volume spraying Job data tracking and USB download Up to 24 chemical recipes and low-drum alerts...

The Graco Reactor 2 E-XP2 is an electric proportioner engineered to process and spray fast-curing polyurea and other coatings that require high pressure.Features Hybrid heater and heated hose condition materials to the right viscosity before mixing Quick-knockdown lower pumps for easy maintenance Easy-to-use controls...