Transfer Pumps & Agitators

The PMC KT-GHO is the full rebuild kit for PMC's GHO high-output 2:1 transfer pump, the air-operated drum pump that feeds material to spray foam and polyurea proportioners.Features Full kit covering both upper and lower pump sections Includes O-rings, packings, springs and wear rings...

The PMC PU-04000-53 is a replacement part for the PMC GHO high-output 2:1 air-operated transfer pump, listed in this store as the suction tube.Features Genuine PMC GHO transfer pump component Keeps feed pumps delivering material to the proportioner Service with the KT-GHO rebuild kit...

The HV HP transfer pump (SPR184) is a drum transfer pump used to feed material from the supply drum to a plural-component proportioner. A reliable transfer pump keeps the proportioner inlet supplied so it can hold ratio and pressure during spraying.Features Transfer pump for...

The Graco Air Driven Expanding Blade Bung-Mounted Agitator, Low Viscosity (24C728) mixes drum materials up to 1,000 cps through the drum bung, so the lid never has to come off. Features Collapsible blades pass through the drum bung and expand when spinning for efficient...

The Graco T2 2:1 Transfer Pump (295616) is a stainless steel supply pump that feeds A and B materials from the drum to a Reactor or other plural-component proportioner. Features Lower pressure drops with higher-viscosity materials at any ambient temperature Quick-release bung adapter for...

The Graco T3 Package, Stainless Steel (24Z988) includes two T3 3:1 transfer pumps and two supply hoses for feeding A and B materials to a Reactor proportioner. Features Merkur air motor paired with the T2 stainless steel lower 3.7 in shorter than the T2...

The Graco T1 Transfer Pump Package (247956) includes two stainless steel 2:1 T1 supply pumps and two supply hoses to move A and B materials from the drums to a Reactor or other plural-component proportioner. Features Consistent feed pressure and flow for dependable proportioner...

The Graco T3 Transfer Pump, Carbon Steel (24Z834) combines Graco's Merkur air motor with the T2 carbon steel lower to move A and B materials to Reactor spray systems using less air pressure. Features 3:1 ratio delivers the needed fluid pressure with less air...

The Graco Heavy Duty Back-Geared Drum Agitator (238157) uses a heavy-duty gearbox to keep high-viscosity finishing materials thoroughly mixed in the drum. Features Leak-free, oil-less gearbox prevents material contamination Stainless steel agitator is corrosion resistant and waterborne compatible Twin paddles thoroughly mix finishing materials...

The PMC P-52 Pump Package (202824) supplies a pair of P-52 2.2:1 transfer pumps to feed both A and B chemicals to a hydraulic proportioner. Features Matched pair for A and B drums Stainless steel construction, made in the USA Low-height design fits standard...

The PMC P-52 2.2:1 Transfer Pump (202806) is a stainless steel drum pump that feeds foam and coatings chemicals to a proportioner at high volume. Features Made in the USA with stainless steel construction Lower-height, higher-output design fits standard 7 ft trailers Wetted and...

The Graco Air Driven Expanding Blade Bung-Mounted Agitator, High Viscosity (24C729) mixes drum materials up to 2,000 cps through the drum bung, so the lid never has to come off. Features Collapsible blades pass through the drum bung and expand when spinning for efficient...

The Graco Twistork Helix Mixer (224854) is a reversible, air-driven drum mixer whose helix blade blends high-viscosity materials directly through a 2-inch drum bung. Features Helix blade effectively mixes high-viscosity materials Sealed agitator drive prevents contamination and evaporation Reversible air motor ATEX approved for...