Breathing Systems

The ArmorThane Mesh Filter (SPO106) is a replacement mesh screen for supplied-air respirator equipment, helping keep debris out of the air path. Features Replaceable mesh screen element Low-cost maintenance part to keep with your respirator service kit Use with the inlet filter assembly (SPO107)...

The ArmorThane Down Tube Assembly, HF Mask (SPO105) is a replacement breathing tube assembly that routes air to the facepiece on HF-style supplied-air masks. Features Replaces cracked, kinked or contaminated breathing tubes Complete assembly for straightforward swap-out Helps keep your respiratory protection in serviceable...

The ArmorThane Waist Belt with Clip Assembly (SPO104) is a replacement belt for supplied-air respirator setups. Clipping the air line at the waist keeps tension off the hood or mask as you move. Features Waist belt with attachment clip Helps keep the air line...

The ArmorThane Exhalation Valve Manifold (SPO103) is the replacement valve housing that holds the exhalation valve on a supplied-air respirator mask. Features Replaces a cracked or damaged manifold Use with the exhalation valve gasket (SPO102) for a complete valve rebuild Part of ArmorThane's respirator...

The ArmorThane Exhalation Valve Gasket (SPO102) is a replacement seal for the exhalation valve on supplied-air respirator masks. A worn gasket can compromise the valve seal, so replacing it is a quick, inexpensive maintenance step. Features Restores the seal at the exhalation valve Low-cost...

The ArmorThane Full Face Lens, Allegro Style (SAF108) is a replacement lens for Allegro-style full-face respirator masks. Swap out a scratched or overspray-coated lens to restore clear vision while spraying. Features Replacement lens for Allegro-style full-face masks Restores visibility without replacing the entire mask...

ArmorThane Peel-Off Lenses for Hood are protective films applied over the hood's viewing window. When overspray builds up, peel off the top layer for a clear view without stopping to clean or replace the window. Features Protects the hood window from overspray Peel away...

The ArmorThane Fresh Air Hood Assembly (SAF-HOOD) is a supplied-air hood that connects to a fresh-air pump or breathing-air source, giving spray applicators head and face coverage while they work with polyurea, polyurethane and other coatings. Features Hood-style facepiece covers the head and face...

The ArmorThane Intake Filter (SAF105) is a replacement intake-side filter for the air pump on ArmorThane fresh-air respirator systems. It filters the ambient air drawn into the pump. Features Filters incoming air at the pump intake Scheduled maintenance item; replace with the exhaust filter...

The ArmorThane Exhaust Filter (SAF106) is a replacement exhaust-side filter for the air pump used in ArmorThane fresh-air respirator systems. Features Routine maintenance part for fresh-air pumps Replace alongside the intake filter (SAF105) during scheduled service Helps keep the pump performing as intended Specifications...

The ArmorThane One-Man Fresh Air Respirator System (SAF102A) supplies clean breathing air to a single spray applicator, making it a practical choice for owner-operators spraying bedliners, polyurea and polyurethane coatings. Features Supplied fresh-air system sized for one operator Use with a supplied-air hood or...

The ArmorThane Two-Man Fresh Air Respirator System (SAF102) supplies clean breathing air to two operators at the same time, ideal for crews where a sprayer and a helper both work in the spray area. Features Supports two users from one system Use with supplied-air...

The ArmorThane Full Face Lens, SAS Style is a replacement lens for SAS-style full-face respirator masks, letting you restore visibility when the lens gets scratched or coated with overspray. Features Replacement lens for SAS-style full-face masks More economical than replacing the whole facepiece Keeps...

The ArmorThane Full Face Mask is a full-facepiece mask used with ArmorThane fresh-air respirator systems, covering the eyes, nose and mouth for spray applicators working with polyurea and polyurethane coatings. Features Full-face coverage including eye protection Connects to supplied fresh-air systems Replacement lenses, peel-offs...

The ArmorThane Breathable Air Line, 50 ft (SAF104) carries clean breathing air from a fresh-air pump or supplied-air source to the sprayer's hood or mask, giving the operator 50 ft of working reach around the job. Features 50 ft length for moving around truck...

ArmorThane Peel-Offs (SAF107) are disposable lens covers for Allegro-style full-face masks. They shield the mask lens from polyurea and coating overspray; simply peel one away when your view gets hazy. Features Protects the mask lens from overspray and scratches Quick peel-away for a fresh,...