Specialty Tools

The ArmorThane PKG152 P2 gun 03 drill bit kit supplies cleaning drills for the 03 mix chamber (Graco GC2503) on the Graco/GlasCraft Probler P2 gun, used for high-output foam and polyurea application.Features Drills sized for the P2 03 chamber Clears cured material without enlarging...

The ArmorThane GUN131 pin vise is a hand tool for holding the small cleaning drills used to clear mix chamber nozzles and impingement ports on plural-component spray foam and polyurea guns. Turning drills by hand gives control and helps avoid enlarging or damaging the...

The ArmorThane PKG153 P2 AA drill bit kit supplies cleaning drills for the AA mix chamber, the smallest round chamber on the Graco/GlasCraft Probler P2 gun. Small AA ports plug quickly, so the right drills are essential for daily cleaning.Features Drills sized for the...

The ArmorThane PKG151 P2 gun 02 drill bit kit is for cleaning the 02 mix chamber on the Graco/GlasCraft Probler P2 gun. Higher-output 02 chambers see a lot of material, and a quick pass with the right drill keeps them flowing.Features Drills sized for...

The ArmorThane PKG150 P2 gun 01 drill bit kit contains cleaning drills for the 01 mix chamber on the Graco/GlasCraft Probler P2 dispense gun. Regular drilling of the nozzle and impingement ports removes cured material that distorts the pattern.Features Drills sized for the P2...

The ArmorThane PKG140 is a cleaning drill bit for 00-size mix chambers on plural-component spray foam and polyurea guns. Used in a pin vise, a correctly sized drill clears cured material from the chamber bore without enlarging it, which keeps spray pattern and mixing...

The TL-04 bulkhead recirculation tool is a specialty service tool used when recirculating material through a plural-component spray machine at the bulkhead connection.Features Dedicated tool for recirculation and service work Helps keep maintenance consistent across your crew Compact enough to store with rebuild kits...

The TL-03 calibration/bleed tool is a service tool for bleeding material lines and taking calibration samples when checking the output of plural-component equipment.Features Helps with ratio checks and routine calibration Useful for bleeding air or old material from lines Keeps a repeatable process for...

The TL-02 ball seat removal tool is a service tool for pulling ball seats from proportioner pump check-valve assemblies during rebuilds.Features Purpose-made for seat removal – less risk of scoring bores than improvised tools Speeds up pump rebuilds and check-valve service Keep one with...

The TL-01 clevis extractor is a specialty tool for removing the clevis connection when servicing or rebuilding proportioner pumps.Features Controlled removal of the clevis without prying or hammering Reduces the risk of damaging rods and pins Speeds up pump teardown Specifications Stock number: TL-01...