Paint & Coatings Equipment

The Graco T3 Transfer Pump, Carbon Steel (24Z834) combines Graco's Merkur air motor with the T2 carbon steel lower to move A and B materials to Reactor spray systems using less air pressure. Features 3:1 ratio delivers the needed fluid pressure with less air...

The Graco Xtreme-Duty High Pressure Hose H43850 is a 3/8 in x 50 ft coupled airless hose rated to 4500 psi. It is designed to withstand the rigors of high-pressure spraying and reduce downtime from hose failure. Features Passes rigorous quality and performance tests...

The Graco 223756 BlueMax II airless hose is a 1/4 in x 15 ft high-performance hose for airless sprayers, rated at 3300 psi and often used as a flexible whip at the gun.Features Over 10% lighter with increased flexibility for easier handling under pressure...

The Graco 25M495 Xtreme-Wrap joint protector covers the most vulnerable points of a heated hose set: the fluid fittings, electrical connections and fluid temperature sensor where two hose sections meet.Features Urethane-coated ballistic nylon for puncture, tear and abrasion resistance Oil and water resistant; sheds...

The Graco Xcelerator Heated Hose 96B101 is a 3/8 in x 50 ft, 2000 psi hose section in Graco's Xcelerator line for Reactor 3 proportioners, giving you fully independent A and B temperature control for tighter pressure balance. Features Fully independent A and B...

The Graco Xcelerator Internal Heated Hose 25P435 is a 3/8 in x 100 ft, 2000 psi hose for Graco Reactor 3 proportioners. Its internal heating and independent A/B temperature control help spray foam crews hit temperature quickly and balance pressures precisely. Features Fully independent...

The Graco Xcelerator External Heated Hose 96B111 is a 3/8 in x 50 ft, 3500 psi heated hose for Graco Reactor 3 systems, pairing high-pressure capability with independent A and B side temperature control. Features Fully independent A and B temperature control Precise pressure...

The Graco Xcelerator Internal Heated Hose 25P535 is a 3/8 in x 100 ft, 3500 psi hose for Graco Reactor 3 proportioners, rated for high-pressure polyurea and coatings work over long runs. Features Fully independent A and B temperature control for precise pressure balance...

The Graco Power-Lock Heated Hose 249587 is a 25 ft, 2000 psi plural-component heated hose designed for Graco Reactor proportioners. It keeps A- and B-side material at temperature all the way to the gun for consistent mixing and spray quality. Features Multi-strand copper heating...

The Graco Reactor 2 Internally Heated Hose 26D095 is a 3/8 in x 50 ft, 2000 psi hose with the heating element inside the fluid path, delivering faster heat-up, lighter weight and better flexibility than traditional externally heated hose. Features Faster heat-up and lighter...

The Graco 24T244 is a 55 ft heavy duty scuff sleeve kit that wraps a heated hose bundle to protect it from abrasion, dragging and jobsite wear.Features Heavy duty sleeve for rough jobsites 55 ft length covers a 50 ft hose section with extra...

The Graco Power-Lock Heated Hose 26C193 is a 3/8 in ID x 25 ft, 3500 psi heated hose for Graco Reactor proportioners. The larger bore and higher pressure rating suit high-output polyurea and coatings work. Note: This hose does not include a scuff jacket...

The Graco 24N450 is a 50 ft (15 m) resistance temperature detector (RTD) cable that connects an RTD fluid temperature sensor to a Graco Reactor proportioner's hose heat controls.Features 4-pin RTD cable for stable temperature signals 50 ft length runs with one heated hose...

The Graco 24J523 is a 50 ft (15 m) thermocouple fluid temperature sensor (FTS) cable that carries the temperature signal along the heated hose to the Graco Reactor's hose heat controls.Features Provides the feedback the Reactor needs to control hose heat accurately and safely...

The Graco 261821 Power-Lock splice kit is used to connect Graco Power-Lock heated hoses, joining the heating wires between hose sections.Features Molded connectors for secure, insulated wire connections Includes oxide inhibitor to protect copper connections Everything needed for the splice, including the hex wrench...

The Graco Power-Lock Heated Hose 246052 is a 50 ft, 3500 psi heated hose for Graco Reactor proportioners, rated for the higher pressures used when spraying polyurea and other fast-set coatings. Features Multi-strand copper heating element, up to 10x the flex life of the...

The Graco Power-Lock Heated Hose 246074 is a 50 ft section of 2000 psi heated hose for Graco Reactor proportioners, the go-to length for building out a spray foam or coatings hose bundle. Features Multi-strand copper heating element for long flex life and uniform...

The Graco 261669 is a thermocouple fluid temperature sensor (FTS) kit with coupler for Graco Reactor heated hose sets. Installed near the whip, it reports material temperature so the Reactor can control hose heat.Features Thermocouple sensing for accurate, reliable temperature feedback Supplied with coupler...

The Graco BlueMax II Whip Hose (238358) is a 3/16 in x 3 ft coupled airless hose that goes between your main paint hose and the spray gun, giving the operator more flexibility and better control at the gun. Features Over 10% lighter than...

The Graco Xcelerator Whip Hose 25P775 is a 1/4 in x 10 ft, 2000 psi high-flex heated whip for Graco Reactor 3 systems. It sits between the Xcelerator hose bundle and the gun to make maneuvering easier and reduce operator fatigue. Features High-flex construction...

The Graco 25P772 is a 1/4 in x 10 ft HP Reactor whip hose rated at 3500 psi (240 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...

The Graco 25P773 is a 1/4 in x 20 ft HP Reactor whip hose rated at 3500 psi (240 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...

The Graco 25P770 is a 1/4 in x 10 ft LP Reactor whip hose rated at 2000 psi (138 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...