Shop All

Graco 246354 is a 6-pack of O-rings used on Graco Fusion guns; on the Fusion AP and PC it seals the clean-off air valve, and on the Fusion CS it is a check valve O-ring.Worn seals and O-rings are the most common cause of...

The Graco 117510 air line coupler is the 1/4 in. NPT coupler used on the air line of Graco Fusion AP, Fusion CS and Fusion MP spray guns, mating with the 117509 male quick-disconnect at the gun.Features Genuine Graco air line coupler 1/4 in....

Amaano 248134-D supplies small piston o-rings for the small piston on Graco Fusion AP guns, ready for scheduled rebuilds. Features Matches the Graco Fusion AP small piston position (Graco part 248134) Field-tested by spray foam contractors in addition to lab testing, per the supplier...

Amaano Air Cylinder Cap O-Ring, Reusable (248136-R) is an aftermarket o-ring for the air cylinder cap position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP air cylinder cap position (Graco part 248136) Field-tested by spray foam contractors in addition...

The Amaano 248135-R large piston o-ring kit is a replacement seal for the large piston of the Graco Fusion AP air purge gun. Features Matches the Graco Fusion AP large piston position (Graco part 248135) Field-tested by spray foam contractors in addition to lab...

Graco 248135 is a package of 6 piston O-rings for the Graco Fusion AP air-purge spray gun, sealing the large air piston.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea work.Features 6...

The Graco 119626 muffler is the replacement muffler listed in the parts lists of the Graco Fusion AP (air-purge) spray gun and the Graco Fusion MP gun.Features Genuine Graco muffler One per gun Fits Fusion AP and Fusion MP Specifications Part number: 119626 Graco...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Large Piston O-Ring Kit, Disposable (248135-D), made for the gun's large piston. Features Matches the Graco Fusion AP large piston position (Graco part 248135) Field-tested by spray foam contractors in addition to lab...

The Graco 15B205 piston stop is a genuine air-section part for Graco Fusion AP and Fusion PC spray guns (ref. 28 in both parts lists). Replace it when it is worn or lost during an air-section rebuild.Features Genuine Graco part Used in both Fusion...

The Graco 117485 compression spring is the air valve spring used in the Graco Fusion family: it appears in the Fusion AP, Fusion CS and Fusion MP parts lists (the MP manual lists it as "Spring, air valve").Features Genuine Graco compression spring Air valve...

Amaano Cleanoff Air Valve O-Ring, Disposable (246354-D) is an aftermarket o-ring for the cleanoff air valve position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP cleanoff air valve position (Graco part 246354) Field-tested by spray foam contractors in addition...

The Graco 15B208 air valve plug closes the air valve bore on Graco Fusion AP and Fusion PC spray guns (ref. 2). It holds the air valve components in place and is sealed with a PTFE o-ring (Graco pack 248137).Features Genuine Graco air valve...

The Graco 15C480 wave washer is a genuine replacement part listed as ref. 20 in the Graco Fusion AP and Fusion PC spray gun parts lists. Replace it when it is flattened, corroded or lost during gun service.Features Genuine Graco wave washer Used on...

The Graco 15B215 lock ring is a genuine replacement part for the Graco Fusion AP air-purge plural-component spray gun (ref. 7). Replace it if it is cracked or no longer locks firmly.Features Genuine Graco lock ring Fits the Fusion AP air-purge gun Quick, inexpensive...

Amaano Fluid Housing O-Ring, Reusable (248132-R) is an aftermarket o-ring for the fluid housing position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP fluid housing position (Graco part 248132) Field-tested by spray foam contractors in addition to lab testing,...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Cleanoff Air Valve O-Ring, Reusable (246354-R), made for the gun's cleanoff air valve. Features Matches the Graco Fusion AP cleanoff air valve position (Graco part 246354) Field-tested by spray foam contractors in addition...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Check Valve Housing O-Ring, Disposable (248129-D), made for the gun's check valve housing. Features Matches the Graco Fusion AP check valve housing position (Graco part 248129) Field-tested by spray foam contractors in addition...

The Graco 203953 screw cap is a #10-24 x 3/8 in. (10 mm) fastener used across a wide range of Graco spray guns, from Fusion foam guns to Silver Plus airless guns.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement...

The Graco 15B203 piston is the air piston that sits inside the cylinder of Graco Fusion AP and Fusion PC spray guns (ref. 15). Air pressure acting on this piston opens and closes the gun when you pull and release the trigger, so a...

Graco 246731 is the complete A-side (ISO) check valve for Graco Fusion AP and Fusion PC plural-component spray guns.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of normal maintenance.Features Complete assembly (Graco includes items...

The Graco 100721 pipe plug is a 1/4-18 NPT plug listed on the Graco Fusion AP (air-purge) spray gun, where Graco notes it is used on round and flat pattern guns only. It is also listed in the Fusion CS and Fusion MP parts...

The Graco 192272 pin is the pivot pin listed as ref. 6 in the Graco Fusion AP and Fusion PC spray gun parts lists. It is the pin the trigger (15B209) pivots on.Features Genuine Graco pivot pin Used on both Fusion AP and Fusion...

The Amaano 248133-R check valve face o-ring is a replacement seal for the check valve face of the Graco Fusion AP air purge gun. Features Matches the Graco Fusion AP check valve face position (Graco part 248133) Field-tested by spray foam contractors in addition...