Shop All

Graco 256467 is a 6-pack of genuine O-rings for the Graco Fusion CS spray gun.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of normal maintenance.Features Six O-rings per package Handy spare during side seal...

The Graco AR4747 mix chamber kit is a round-pattern (AR = air purge, round) mix chamber for the Graco Fusion AP air-purge plural-component spray gun, in the 0.047 in. size. It is a common choice for spray foam and polyurea contractors who need a...

The Graco 246012 fluid manifold is the complete two-hose manifold that connects the A and B hoses to Graco Fusion AP and Fusion PC plural-component spray guns.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig...

The Graco 256415 round tip front cover 5-pack protects the front of Graco Fusion CS guns running round-pattern tips.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig to avoid losing a day to a small...

Graco 257429 is the ISO (A-side) side seal kit for the Graco Fusion CS spray gun.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea work.Features A-side (ISO) specific kit Restores a leak-free...

The Graco 15B204 cylinder cap closes off the air cylinder at the back of Graco Fusion AP and Fusion PC plural-component guns (ref. 5). A sound cylinder cap and fresh o-rings help the air section open and close the gun reliably.Features Genuine Graco cylinder...

The Graco 26C775 blue lock ring secures the front end of the Graco Fusion PC plural-component spray gun.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of normal maintenance.Features Replaces a cracked, worn or lost...

Graco 256457 is the fluid housing assembly kit for the Graco Fusion CS spray gun.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig to avoid losing a day to a small failure.Features Complete fluid housing...

Graco 249523 is the four-hose fluid manifold for Graco Fusion AP and Fusion PC plural-component spray guns.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold valves.Features Four-hose manifold assembly (Graco includes items 12a, 12b, 12d–12g...

The Graco 246361 front end replacement kit rebuilds the front of a Graco Fusion AP air-purge gun in one step.Worn seals and O-rings are the most common cause of crossover, leaks and pattern problems on plural-component guns, so keeping replacements on hand saves downtime.Features...

Amaano 248136-D supplies air cylinder cap o-rings for the air cylinder cap on Graco Fusion AP guns, ready for scheduled rebuilds. Features Matches the Graco Fusion AP air cylinder cap position (Graco part 248136) Field-tested by spray foam contractors in addition to lab testing,...

The Graco 246348 side seal kit supplies stainless steel side seals for the Graco Fusion AP air-purge spray gun, the seals that ride against the mix chamber.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold...

Graco 248136 is a package of 6 cylinder cap O-rings for the Graco Fusion AP air-purge spray gun, sealing the rear cylinder cap.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of normal maintenance.Features 6...

The Graco 15B565 ball valve is a 1/4 npt male-by-female ball valve listed in the tool kit and accessory parts for Graco Fusion AP and Fusion PC plural-component spray guns (ref. 51). It gives the applicator a quick shutoff on the gun air supply.Features...

The Graco 248064 safety stop assembly is the complete rear safety stop for Graco Fusion AP and Fusion PC plural-component spray guns.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig to avoid losing a day...

The Graco 15B202 valve spool is the genuine replacement spool for the air valve section of Graco Fusion AP and Fusion PC plural-component spray guns (ref. 32 in both parts lists). Replace it when the air valve sticks, leaks or no longer shifts cleanly.Features...

The Graco 19Y303 fluid housing kit replaces the fluid housing on the Graco Fusion PC plural-component spray gun together with the parts that mount to it. It is the fastest way to restore a Fusion PC front end that has a damaged housing or...

The Graco 15B993 lock ring spring is part of the 2-hose fluid manifold (246012) used on Graco Fusion AP and Fusion PC plural-component spray guns (ref. 12g). Replace it if it is weak, deformed or missing so the manifold and lock ring stay secure.Features...

Amaano Small Piston O-Ring, Reusable (248134-R) is an aftermarket o-ring for the small piston position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP small piston position (Graco part 248134) Field-tested by spray foam contractors in addition to lab testing,...

The Graco PC20FL Fusion PC mix chamber is a flat-pattern, size 000 mix chamber for the Graco Fusion ProConnect (PC) plural-component spray gun. It is Graco's smallest PC size, suited to lower-output spray foam and coating work.Features Flat spray pattern for wide, even passes...

The Graco 114070 spring is a genuine Graco spring listed in the parts list of the Graco Fusion AP (air-purge) spray gun, rated to 3500 psi maximum fluid working pressure.Features Genuine Graco part 114070 Fusion AP replacement spring One used per gun Specifications Part...

The Graco 246355 complete O-ring kit contains the O-rings needed to fully reseal a Graco Fusion AP air-purge spray gun.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold valves.Features Covers side seals, cartridges, check valves,...

The Graco 117509 quick-disconnect is the male 1/4 in. NPT(M) air fitting used as the air inlet on Graco Fusion guns. Graco specifies a 1/4 NPT quick-disconnect nipple as the Fusion AP air inlet, and notes this part is for round and flat pattern...