Shop All

Graco 248128 is a package of 6 side seal O-rings for the Graco Fusion AP air-purge spray gun, sealing behind the side seals.Worn seals and O-rings are the most common cause of crossover, leaks and pattern problems on plural-component guns, so keeping replacements on...

The Amaano 248131-R fluid block o-ring is a replacement seal for the fluid block of the Graco Fusion AP air purge gun. Features Matches the Graco Fusion AP fluid block position (Graco part 248131) Field-tested by spray foam contractors in addition to lab testing,...

Graco 246491 is the fluid housing for the Graco Fusion AP air-purge plural-component spray gun.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea work.Features Bare housing; transfer or replace internal parts as...

Graco 248130 is a package of 6 cartridge body O-rings for the Graco Fusion AP air-purge spray gun, sealing the side seal cartridge bodies.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea...

Amaano Side Seal Housing O-Ring, Reusable (248130-R) is an aftermarket o-ring for the side seal housing position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP side seal housing position (Graco part 248130) Field-tested by spray foam contractors in addition...

Amaano 248130-D supplies side seal housing o-rings for the side seal housing on Graco Fusion AP guns, ready for scheduled rebuilds. Features Matches the Graco Fusion AP side seal housing position (Graco part 248130) Field-tested by spray foam contractors in addition to lab testing,...

Graco 248131 is a pack of front O-rings for the Graco Fusion AP air-purge spray gun, used at the gun's front end / air cap area.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Teflon Air Cap O-Ring, Reusable (248137-R), made for the gun's air cap. Features Matches the Graco Fusion AP air cap position (Graco part 248137) Field-tested by spray foam contractors in addition to lab...

Graco 248860 is the thread insert kit for the Graco Fusion AP air-purge spray gun, used to repair threads in the fluid housing.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea work.Features...

Graco 248137 is a package of 6 PTFE O-rings for the Graco Fusion AP air-purge spray gun, sealing the air cap.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig to avoid losing a day to...

The Graco 15B689 grease fitting cover snaps over the grease fitting on Graco Fusion AP and Fusion PC plural-component spray guns (ref. 37). Keeping the fitting covered helps keep overspray and debris out, so the gun can be greased properly at the end of...

The Graco 15B210 air cap is the front air cap used on round-pattern Graco Fusion AP and Fusion PC plural-component spray guns (ref. 10). It fits over the mix chamber at the front of the gun and is a common replacement when the cap...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Fluid Block O-Ring, Disposable (248131-D), made for the gun's fluid block. Features Matches the Graco Fusion AP fluid block position (Graco part 248131) Field-tested by spray foam contractors in addition to lab testing,...

The Graco 15B211 retaining ring is the front retaining ring on the Graco Fusion AP air-purge plural-component spray gun (ref. 9). It holds the front-end components in place and is removed during mix-chamber and air-cap service.Features Genuine Graco retaining ring Fits the Fusion AP...

The Graco 2007352 is a 10 pack of 3 oz shutdown grease cartridges for the Graco Fusion FX spray gun. Graco formulates this low-viscosity grease to flow easily through the gun's passages, preventing two-component curing and keeping fluid passages clean between jobs.Features Ten 3...

The Graco 2006355 Fusion FX shutdown grease cartridge is a single cartridge of the shutdown grease Graco specifies for the Fusion FX spray gun. Graco describes the grease as specially formulated low-viscosity grease that flows easily through gun passages to prevent two-component curing and...

The Graco 2000974 Fusion FX hose manifold assembly connects the heated whip hoses to the Graco Fusion FX spray gun. It carries the A- and B-side filter housings, check manifold housings and manual fluid valves, and mounts to the gun with the manifold bolt.Features...

The Graco 2009349 Fusion FX flat air cap kit lets the Fusion FX gun run Graco's flat spray tips for a fan pattern, the style many polyurea and coatings applicators prefer for even film build on floors, walls and truck beds.Features Converts the FX...

The Graco 2005268 extension tip cap (47–70) is the largest Fusion FX extension tip, for use with the bigger round mix chambers. It extends the gun's reach while giving a controlled pattern on high-output foam and polyurea work.Features Built for larger FX round chambers...

The Graco 2005267 extension tip cap (37–42) extends the front of the Graco Fusion FX gun for mid-size round mix chambers, giving a tighter, longer-throw pattern for reaching high walls, deep cavities or tight framing bays.Features Longer reach without moving the rig Tighter pattern...

The Graco 2005266 Fusion FX extension tip cap (34–42) fits over the front of the Fusion FX gun to extend reach and tighten the spray pattern from smaller round mix chambers. It helps when you need to reach into cavities or spray farther without...

The Graco 119421 o-ring is used in several places on the Graco Fusion FX spray gun. Graco's parts list shows it in the CS piston assembly (three per assembly) and in the gun body (four), making it one of the most commonly replaced o-rings...

The Graco 2005366 Fusion FX MC seal kit contains ten mix chamber seals for the Graco Fusion FX spray gun. The seal sits at the mix chamber, and a worn seal can leak or let material bypass, so replacing it on a regular schedule...