Paint & Coatings Equipment

The PMC 3/8" x 50' High-Pressure Heated Hose (200008) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...

The PMC GHO Lower Pump Kit (KT-GHO-L) is a repair kit for the lower (fluid) section of GHO-style transfer pumps, including the PMC P-52. Specifications Part number: KT-GHO-L Type: Lower pump repair kit Compatibility PMC P-52 transfer pump; PMC states the P-52 shares spare...

The PMC GHO Upper Pump Kit (KT-GHO-U) is a repair kit for the upper section of GHO-style transfer pumps, including the PMC P-52. Specifications Part number: KT-GHO-U Type: Upper pump repair kit Compatibility PMC P-52 transfer pump (shares spare parts with GHO pumps). Order...

The PMC P-52 Pump Package (202824) supplies a pair of P-52 2.2:1 transfer pumps to feed both A and B chemicals to a hydraulic proportioner. Features Matched pair for A and B drums Stainless steel construction, made in the USA Low-height design fits standard...

The PMC P-52 2.2:1 Transfer Pump (202806) is a stainless steel drum pump that feeds foam and coatings chemicals to a proportioner at high volume. Features Made in the USA with stainless steel construction Lower-height, higher-output design fits standard 7 ft trailers Wetted and...

The PMC Xtreme Full Gun Rebuild Kit (202757) contains the wear parts needed to restore a PMC Xtreme air purge spray and pour gun to working condition. Features One kit covers a complete gun rebuild Keeps a spare on the rig to avoid downtime...

The PMC Xtreme Side Seal, .125 Engineered Resin (202454) seals each chemical port against the mixing chamber on the PMC Xtreme gun. Features Engineered resin side seal, part of the Xtreme gun's reliability design Common wear item to keep on hand Specifications Part number:...

The PMC Diamond-Plated Chamber/PCT Kit #01 (KT-814-DP-01) bundles a #01 diamond-plated mixing chamber with a matching round Pattern Control Tip for the PMC Xtreme air purge gun. Features Diamond-plated chamber for scratch resistance and long service life Matched round PCT for a consistent spray...

The PMC Diamond-Plated Mixing Chamber #01 (GU-814-DP-01) is the replacement mix chamber for the PMC Xtreme spray gun, where both components impinge and mix before leaving the gun. Features Diamond plating with 36% higher scratch resistance, per PMC PMC reports up to 60 sets...

The PMC PX-7 Mechanical Purge Pour Gun, A3 Package (200572) is set up with an A3 pour module for dispensing plural-component foam into cavities, molds and lifts. Features Valving rod mechanically purges mixed material at the end of each shot No solvent flushing or...

The PMC PX-7 Mechanical Purge Spray Gun, #5 Module/#70 Tip Package (200565) is a mechanical purge gun for roofing foam, insulation and coatings. Features Valving rod purges the mixing module after each shot, eliminating solvent flush or air purge Modules #1, #3, #5 and...

The PMC AP-2 Air Purge Spray Gun, 01 Mix/Flat Tip Package (GU-AP-2-01-FPKG) is a plural-component gun for spray foam and coatings, set up with an 01 mixing chamber and a flat-pattern tip. Features Air purge clears the mix chamber when the trigger is released...

The PMC AP-2 Air Purge Spray/Pour Gun, 01 Mix/01 Round PCT Package (GU-AP-2-01-PKG) is a lightweight plural-component gun for spray foam and coatings, fitted with a separate mix chamber and a round Pattern Control Tip. Features Separate mixing chamber and Pattern Control Tip (PCT)...

The PMC Xtreme Air Purge Spray Gun, 01 Chamber/PCT Package, Steel (202725) is the steel version of PMC's Xtreme gun for spray foam and coatings. Features Diamond-plated 01 mixing chamber with Pattern Control Tip Engineered resin side seals Spring-loaded check valve helps prevent chemical...

The PMC Xtreme Air Purge Spray Gun, 01 Chamber/PCT Package (202724) is PMC's simplified, high-reliability spray and pour gun for foam and coatings. Features Diamond-plated mixing chambers (GU-814-DP series); PMC reports up to 60 sets sprayed on one chamber Engineered resin side seals Spool-and-liner...

The Graco LineDriver ES Lithium Ride-On Attachment (25U670) turns a walk-behind LineLazer, FieldLazer or GrindLazer into a ride-on, with quiet lithium power and precise speed control for consistent mil thickness.Features ExactMil speed control: set your speed for consistent lines SmartDrive regenerative braking and Eco-Mode...

The Graco LineDriver HD with Electric Start Ride-On Attachment (25U474) adds push-button starting to the heavy-duty LineDriver HD, so operators can ride their striper, ThermoLazer or GrindLazer without a pull cord.Features Electric start for fast, easy starts FlexBeam LED light system with retractable, breakaway...

The Graco LineDriver HD Ride-On Attachment (262005) is the heavy-duty, 6.5 HP ride-on for striping, thermoplastic and scarifying crews who want more power for heavier units and long days.Features FlexBeam LED light system with retractable, breakaway design Dual foot pedals for forward and reverse...

The Graco LineDriver Ride-On Attachment (262004) lets striping operators ride behind their LineLazer, ThermoLazer or GrindLazer for faster, straighter lines on big lots and roads.A Honda GX engine drives the unit, and dual foot pedals handle forward and reverse so the operator keeps both...

The Graco FieldLazer ES100 Battery-Powered Airless Field Striper (26U003) lets schools, parks and sports-turf crews line athletic fields without a gas engine, fuel or pull-start.It uses airless technology to lay crisp lines on grass and turf, and its battery power keeps things quiet around...

The Graco FieldLazer S100 Airless Field Striper (248942) is a compact, Honda-powered walk-behind striper that paints athletic field lines straight from a 5-gallon bucket.Features Easy Reach handlebar controls Hardened stainless steel rod and cylinder with QuikAccess intake Adjustable spray guides with no-tool 2-8 in...

The Graco ThermoLazer ProMelt Thermoplastic Striping System (24H624) melts thermoplastic on board, so contractors can stripe without a separate premelt kettle.With on-board melting and die heat, one crew can go from solid thermoplastic to finished, beaded lines on crosswalks, arrows and stop bars.Features 4-chamber...

The Graco ThermoLazer 300TC Thermoplastic Striping System (24H622) is a gas-heated walk-behind thermoplastic applicator that handles as easily as a LineLazer, with SmartDie II for clean, consistent lines.It suits contractors laying crosswalks, stop bars, arrows and long lines in thermoplastic, and it can be...