Paint & Coatings Equipment

The Graco Reactor Heated Whip Hose 249586 is a short 1/4 in x 3 ft, 2000 psi heated whip that provides a flexible, heated final connection between the main hose bundle and the spray gun. Features Multi-strand copper heating element for long flex life...

The Graco Contractor Flat Tip 269211 (size 211) is a flat airless spray tip designed for narrower surfaces and thin materials, such as trim, doors and railings. Features Narrow fan pattern for controlled coverage on small areas Small orifice suited to thin materials Flat...

The Graco Fine Finish Flat Tip 163108 (size 108) is a precision airless spray tip held to Graco's tightest cut tolerance, built for high-quality industrial fine-finish work. Features Precision-cut orifice for a consistent, even pattern Made for high-quality industrial fine-finish applications Very small orifice...

The Graco RAC X Low Pressure SwitchTip LP313 is a high-production reversible tip that sprays at up to 50% lower pressure, producing a 6 to 8 in fan through a 0.013 in orifice. Reverse the tip to clear clogs. Features Made for large surfaces...

The Graco RAC X Fine Finish Low Pressure SwitchTip FFLP108 lets you spray at up to 50% lower pressure, producing less overspray, easier pattern overlap and up to twice the life of a regular tip. It is ideal for thinner materials and fine-finish work....

The Graco RAC X Wide RAC SwitchTip WR1221 covers double the area in the same time, with increased flow to maintain proper mil build. It is made for high-production new-construction work that may require larger airless sprayers. Features Wide fan doubles coverage per pass...

The Graco LineLazer RAC 5 SwitchTip LL5213 is a reversible striping tip that creates clean, laser-sharp lines with no fuzzy edges or thin spots on Graco LineLazer line stripers. Features Sharp line edges with consistent paint thickness from edge to edge Less overspray and...

The Graco RAC XHD SwitchTip in large fan sizes (base SKU XHD711) is a heavy-duty carbide airless tip for spraying high-solids protective coatings at high pressure, rated up to 7250 psi. Features Reverse-A-Clean design clears clogs quickly Change tip sizes in seconds without removing...

The Graco RAC XHD SwitchTip in small fan sizes (base SKU XHD107) gives precise, narrow patterns for high-solids coatings sprayed at high pressure, with a heavy-duty carbide insert rated to 7250 psi. Features Narrow fans for detail work, edges and small parts Reverse-A-Clean tip...

The Graco RAC X SwitchTip in large fan sizes (base SKU LTX817) is built for fast coverage on big walls, roofs and industrial surfaces. The reversible design clears clogs in seconds without removing the guard. Features Long-lasting fan pattern Consistent spray pattern for a...

The Graco RAC X SwitchTip is Graco's reversible airless spray tip for residential, commercial and industrial painting. This listing covers the small 2-8 in fan sizes (base SKU LTX207); flip the tip to clear clogs without removing the guard. Features Long-lasting fan pattern with...

The Graco 100016 is a genuine Graco lock washer used in the assemblies of Graco spray equipment.Features Genuine Graco hardware for an exact match to the parts list Helps keep fasteners from backing out under vibration Worth adding to the order whenever you replace...

The Graco Heavy Duty Back-Geared Drum Agitator (238157) uses a heavy-duty gearbox to keep high-viscosity finishing materials thoroughly mixed in the drum. Features Leak-free, oil-less gearbox prevents material contamination Stainless steel agitator is corrosion resistant and waterborne compatible Twin paddles thoroughly mix finishing materials...

The PMC Coupling Block Flush Kit, F-AP (200218) is a flushing kit that connects at the coupling block of PMC air-purge spray guns for solvent cleaning. Specifications Part number: 200218 Type: Coupling-block flush kit Compatibility PMC air-purge guns. Call (417) 831-5090 to confirm fit...

The PMC 2.5 Gallon Solvent Flush Pot Kit (200426) is a pressurized flush pot for cleaning PMC spray guns and whip hoses at the end of the day or before storage. Features 2.5-gallon pressure pot for gun and hose flushing Helps prevent material cure...

The PMC 50' TSU Wire Harness (MA-00006A) is a 50 ft extension wire that carries the temperature sensing unit (TSU) signal along a heated hose run back to the proportioner. Specifications Part number: MA-00006A Length: 50 ft Type: TSU extension wire harness Compatibility PMC...

The PMC TSU (Temperature Sensing Unit) Block Assembly (EL-51A-4) measures fluid temperature in a PMC heated hose so the proportioner can control hose heat accurately. Features Designed for a smaller hose bundle diameter at the TSU connection Consolidates the chemical and air hose connections...

The PMC 1/4" x 25' High-Pressure Whip Hose (MA-00040A-25) gives extra reach at the gun end of a heated hose run, so applicators can move without dragging the full hose bundle. Specifications Part number: MA-00040A-25 Size: 1/4 in x 25 ft Maximum working pressure:...

The PMC 1/4" x 10' High-Pressure Whip Hose (MA-00040A) is the flexible end section between the heated hose and the spray gun, giving the applicator lighter, easier gun handling. Specifications Part number: MA-00040A Size: 1/4 in x 10 ft Maximum working pressure: 3,500 psi...

The PMC 1/2" x 50' High-Pressure Heated Hose (200024) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...

The PMC 3/8" x 50' High-Pressure Heated Hose (MA-00039A) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element No...

The PMC 3/8" x 50' High-Pressure Heated Hose (MA-00039A-TC) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element No...

The PMC 3/8" x 50' High-Pressure Heated Hose (200007) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...