Graco Fusion AP Gun Parts
Replacement parts for the Graco Fusion AP spray gun. Use our interactive Gun Parts Finder to pick parts from the exploded diagram.
Categories
-
Vendor:The Graco Fusion AP Air-Purge Gun (246102) is Graco's most popular plural-component gun, spraying both polyurethane foam and polyurea. This model comes with a round-pattern 02 mix chamber.Features Air-blast tip cleaning reduces build-up and tip clogging Long-lasting side seals mean less downtime Quick-release fluid...Applicator priceRegular price From $0.00Regular priceUnit price per
-
Vendor:The Graco 15B206 safety lock is the genuine trigger safety for Graco Fusion AP and Fusion PC plural-component guns (ref. 4). Engaging the safety lock keeps the gun from being triggered when you are not spraying, during breaks, and while servicing the gun.Features Genuine...Applicator priceRegular price $53.50Regular priceUnit price per
-
Vendor:The Graco 246348 side seal kit supplies stainless steel side seals for the Graco Fusion AP air-purge spray gun, the seals that ride against the mix chamber.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold...Applicator priceRegular price $52.50Regular priceUnit price per
-
Vendor:The Graco AR4747 mix chamber kit is a round-pattern (AR = air purge, round) mix chamber for the Graco Fusion AP air-purge plural-component spray gun, in the 0.047 in. size. It is a common choice for spray foam and polyurea contractors who need a...Applicator priceRegular price From $232.75Regular priceUnit price per
-
Vendor:The Amaano 246355-R Complete O-Ring Repair Kit is an aftermarket o-ring set for rebuilding the Graco Fusion AP air purge spray foam gun in one job. Features Cross-references the Graco Fusion AP complete o-ring repair kit (246355) Field-tested by spray foam contractors in addition...Applicator priceRegular price $0.00Regular priceUnit price per
-
Vendor:The Graco 246355 complete O-ring kit contains the O-rings needed to fully reseal a Graco Fusion AP air-purge spray gun.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold valves.Features Covers side seals, cartridges, check valves,...Applicator priceRegular price $126.40Regular priceUnit price per
-
Vendor:The Graco 248064 safety stop assembly is the complete rear safety stop for Graco Fusion AP and Fusion PC plural-component spray guns.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig to avoid losing a day...Applicator priceRegular price $294.98Regular priceUnit price per
-
Vendor:Graco 249523 is the four-hose fluid manifold for Graco Fusion AP and Fusion PC plural-component spray guns.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold valves.Features Four-hose manifold assembly (Graco includes items 12a, 12b, 12d–12g...Applicator priceRegular price $473.00Regular priceUnit price per
-
Vendor:The Graco 15B204 cylinder cap closes off the air cylinder at the back of Graco Fusion AP and Fusion PC plural-component guns (ref. 5). A sound cylinder cap and fresh o-rings help the air section open and close the gun reliably.Features Genuine Graco cylinder...Applicator priceRegular price $155.50Regular priceUnit price per
-
Vendor:The Graco 246361 front end replacement kit rebuilds the front of a Graco Fusion AP air-purge gun in one step.Worn seals and O-rings are the most common cause of crossover, leaks and pattern problems on plural-component guns, so keeping replacements on hand saves downtime.Features...Applicator priceRegular price $1,955.00Regular priceUnit price per
-
Vendor:The Graco 246012 fluid manifold is the complete two-hose manifold that connects the A and B hoses to Graco Fusion AP and Fusion PC plural-component spray guns.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig...Applicator priceRegular price $551.00Regular priceUnit price per
-
Vendor:The Graco 114070 spring is a genuine Graco spring listed in the parts list of the Graco Fusion AP (air-purge) spray gun, rated to 3500 psi maximum fluid working pressure.Features Genuine Graco part 114070 Fusion AP replacement spring One used per gun Specifications Part...Applicator priceRegular price $20.60Regular priceUnit price per
-
Vendor:Amaano Air Cylinder Cap O-Ring, Reusable (248136-R) is an aftermarket o-ring for the air cylinder cap position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP air cylinder cap position (Graco part 248136) Field-tested by spray foam contractors in addition...Applicator priceRegular price $0.00Regular priceUnit price per
-
Vendor:The Amaano 248135-R large piston o-ring kit is a replacement seal for the large piston of the Graco Fusion AP air purge gun. Features Matches the Graco Fusion AP large piston position (Graco part 248135) Field-tested by spray foam contractors in addition to lab...Applicator priceRegular price $0.00Regular priceUnit price per
-
Vendor:Amaano 248136-D supplies air cylinder cap o-rings for the air cylinder cap on Graco Fusion AP guns, ready for scheduled rebuilds. Features Matches the Graco Fusion AP air cylinder cap position (Graco part 248136) Field-tested by spray foam contractors in addition to lab testing,...Applicator priceRegular price $0.00Regular priceUnit price per
-
Vendor:Graco 248136 is a package of 6 cylinder cap O-rings for the Graco Fusion AP air-purge spray gun, sealing the rear cylinder cap.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of normal maintenance.Features 6...Applicator priceRegular price $79.19Regular priceUnit price per
-
Vendor:The Graco 15B205 piston stop is a genuine air-section part for Graco Fusion AP and Fusion PC spray guns (ref. 28 in both parts lists). Replace it when it is worn or lost during an air-section rebuild.Features Genuine Graco part Used in both Fusion...Applicator priceRegular price $24.10Regular priceUnit price per
-
Vendor:Keep your Fusion AP gun sealing properly with the Amaano Amaano Large Piston O-Ring Kit, Disposable (248135-D), made for the gun's large piston. Features Matches the Graco Fusion AP large piston position (Graco part 248135) Field-tested by spray foam contractors in addition to lab...Applicator priceRegular price $0.00Regular priceUnit price per
-
Vendor:Graco 248135 is a package of 6 piston O-rings for the Graco Fusion AP air-purge spray gun, sealing the large air piston.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea work.Features 6...Applicator priceRegular price $87.72Regular priceUnit price per
-
Vendor:The Graco 15B208 air valve plug closes the air valve bore on Graco Fusion AP and Fusion PC spray guns (ref. 2). It holds the air valve components in place and is sealed with a PTFE o-ring (Graco pack 248137).Features Genuine Graco air valve...Applicator priceRegular price $39.00Regular priceUnit price per
-
Vendor:The Graco 15B565 ball valve is a 1/4 npt male-by-female ball valve listed in the tool kit and accessory parts for Graco Fusion AP and Fusion PC plural-component spray guns (ref. 51). It gives the applicator a quick shutoff on the gun air supply.Features...Applicator priceRegular price $18.85Regular priceUnit price per
-
Vendor:The Graco 117485 compression spring is the air valve spring used in the Graco Fusion family: it appears in the Fusion AP, Fusion CS and Fusion MP parts lists (the MP manual lists it as "Spring, air valve").Features Genuine Graco compression spring Air valve...Applicator priceRegular price $7.00Regular priceUnit price per
-
Vendor:The Graco 117509 quick-disconnect is the male 1/4 in. NPT(M) air fitting used as the air inlet on Graco Fusion guns. Graco specifies a 1/4 NPT quick-disconnect nipple as the Fusion AP air inlet, and notes this part is for round and flat pattern...Applicator priceRegular price $15.22Regular priceUnit price per
-
Vendor:Amaano Cleanoff Air Valve O-Ring, Disposable (246354-D) is an aftermarket o-ring for the cleanoff air valve position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP cleanoff air valve position (Graco part 246354) Field-tested by spray foam contractors in addition...Applicator priceRegular price $0.00Regular priceUnit price per
