Carlisle

The Carlisle 336419 air piston o-rings are the replacement seals for the air piston of the Carlisle ST1 spray foam gun. The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle o-rings Air piston size Pair with the 336370 rod and...

The Carlisle 336397 QD coupler is the air-line quick-disconnect coupler for the Carlisle ST1 air-purge spray foam gun, letting you connect and disconnect gun air quickly. The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336397 Air-line quick-disconnect coupler...

The Carlisle 336412 o-ring 10-pack covers the air valve and piston rod seals on the Carlisle ST1 air-purge spray foam gun. The ST1 is designed for single-tool field maintenance.Features Genuine Carlisle o-rings Air valve / piston rod size 10 o-rings per pack Specifications Part...

The Carlisle ST1 Air-Purge Spray Gun (336507) is a plural-component impingement gun for spray foam and polyurea, designed for consistent patterns, more uptime and less hand fatigue.Features Check valve eliminates crossover of material into the air passage Quick-change tips and mix chambers to tune...

The Carlisle 336408 ball valve is a genuine Carlisle replacement valve for the ST1 spray foam gun. The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336408 Replacement ball valve Replace when leaking or hard to operate Specifications Part...

The Carlisle 336418 o-ring 10-pack contains check valve face o-rings for the Carlisle ST1 air-purge spray foam gun, used with the 336360 and 336361 check valve assemblies. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features Genuine Carlisle o-rings...

The Carlisle 336399 clip is a genuine replacement clip for the Carlisle ST1 spray foam gun. The ST1 uses an air-purge design with an integral air check valve to keep material out of the air passages.Features Genuine Carlisle part 336399 Small hardware item that...

The Carlisle 336373 end cap is the replacement end cap for the Carlisle ST1 spray foam gun. Its matching o-rings are available as 336420 (2-pack). The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336373 Replaces a damaged end...

The Carlisle 336420 o-ring 2-pack is the end cap o-ring set for the Carlisle ST1 air-purge spray foam gun, used with the 336373 end cap. The ST1 is designed for single-tool field maintenance.Features Genuine Carlisle o-rings End cap size 2 o-rings per pack Specifications...

The Carlisle 336360 fluid check valve assembly (A side) is the ISO-side check valve for the Carlisle ST1 air-purge spray foam gun. Check valves stop material from flowing backward, helping prevent crossover between the A and B sides. The ST1's Ultra Onyx coated body...

The Carlisle 336361 fluid check valve assembly (B side) is the resin-side check valve for the Carlisle ST1 spray foam gun, the companion to the A-side 336360 valve. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features Genuine Carlisle...

The Carlisle 336355 fluid manifold is the bare manifold for the Carlisle ST1 spray foam gun, for rebuilders who want to reuse their existing valves and fittings. The ST1's Ultra Onyx coated body is built for easier cleaning and longer life.Features Genuine Carlisle part...

The Carlisle 336354 fluid manifold assembly is the complete replacement fluid manifold for the Carlisle ST1 air-purge spray foam gun. It carries the A (ISO) and B (resin) streams from the hoses into the gun. The ST1 uses an air-purge design with an integral...

The Carlisle 336436 flush manifold assembly is the flush manifold assembly for the Carlisle ST1 air-purge spray foam gun, used when flushing and cleaning the gun. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features Genuine Carlisle ST1 flush...

The Carlisle 336426 front end assembly kit is a complete front end assembly for the Carlisle ST1 spray foam gun, a fast way to recover a gun with a damaged or heavily fouled front end. The ST1 uses an air-purge design with an integral...

The Carlisle 336738 grease fitting is the replacement grease (zerk) fitting for the Carlisle ST1 spray foam gun, used for routine gun lubrication. The ST1 is designed for single-tool field maintenance.Features Genuine Carlisle part 336738 Grease fitting for gun lubrication Replace if damaged or...

The Carlisle 336415 o-ring 10-pack supplies guide and housing o-rings for the Carlisle ST1 air-purge spray foam gun. The ST1's Ultra Onyx coated body is built for easier cleaning and longer life.Features Genuine Carlisle o-rings Guide and housing size 10 o-rings per pack Specifications...

The Carlisle 336437 guide is the ST1 guide assembly, supplied with its o-ring, for the Carlisle ST1 spray foam gun. The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336437 Guide assembly supplied with o-ring Spare guide and housing...

The Carlisle 336417 o-ring 2-pack seals the junction between the head and handle of the Carlisle ST1 spray foam gun. Replace them whenever the head is separated from the handle. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features...

The Carlisle 336353 head is the main gun head (body block) of the Carlisle ST1 air-purge spray foam gun, sold on its own for rebuilding a gun with a damaged body. The ST1 is designed for single-tool field maintenance.Features Genuine Carlisle ST1 gun head...

The Carlisle 336736 lock arm is a genuine Carlisle replacement lock arm for the ST1 spray foam gun. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features Genuine Carlisle part 336736 Replacement lock arm Replace if bent, cracked or...

The Carlisle 336356 manifold screw secures the fluid manifold on the Carlisle ST1 air-purge spray foam gun. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features Genuine Carlisle part 336356 Secures the ST1 fluid manifold Replace stripped or lost...

The Carlisle 336372 manual valve is the fluid manifold shutoff valve assembly for the Carlisle ST1 air-purge spray foam gun, used to close off material at the manifold. The ST1 accepts interchangeable mix chambers and tips for different flow rates and patterns.Features Genuine Carlisle...