armorthane

This 5/16 in JIC x 1/4 in MPT Coupler adapts a 5/16 in JIC connection to a 1/4 in female pipe port. It is a common piece in the fluid plumbing of spray rigs and transfer systems. Keep a few on hand for hose...

Use this 5/8 in O-Clamp, Zinc Plated when a job calls for a part that secures 5/8 in hose on barbs and fittings. Use it wherever flexible hose slips over a barb or fitting. Keep a supply on hand for hose repairs.Features Holds hose...

The EQU174 50 kW generator provides extra electrical capacity for larger mobile spray rigs, where bigger proportioner heaters, longer heated hose runs and auxiliary equipment share one power source.Benefits Additional headroom over a 40 kW unit for high-output rigs Supports heated hose, proportioner and...

The Air Cylinder Bushing (GUN-ACB) is a replacement bushing for the air cylinder of a high-pressure spray gun, used when rebuilding the gun's air section. Specifications Part number: GUN-ACB (ArmorThane stock number) Type: Air cylinder bushing Compatibility Call ArmorThane at (417) 831-5090 to confirm...

The ArmorThane GUN-AM air muffler is a replacement exhaust muffler for air-operated high-pressure spray guns used with spray foam and polyurea. It softens the sharp blast of exhaust air each time the gun cycles, keeping the work area quieter for the operator.Features Replaces a...

The ArmorThane 1/2 in jaw coupler with keyway (stock SPR131) is one half of the jaw-type drive coupling that connects the motor to the material pump on ArmorThane low-pressure spray machines.Features 1/2 in size with keyway to lock onto the shaft Works with the...

The ArmorThane 1/2" FPT female bulkhead fitting creates a threaded pass-through in a tank, drum or panel wall, giving you 1/2" female pipe thread connections on the fitting.Features 1/2" female pipe thread (FPT) connection Bulkhead style for mounting through a wall Stocked for spray...

The ArmorThane 1/2" JIC ISO hose coupler joins sections of ISO (A-side) hose with 1/2" JIC connections, used when building or repairing plural-component hose sets.Features 1/2" JIC connections For the ISO (A-side) hose line Keeps spare hose sections ready to connect Specifications Size: 1/2"...

The ArmorThane 1/2" JIC x 1/2" MPT steel connector adapts a 1/2" JIC hose connection to a 1/2" male pipe thread port.Features Steel construction 1/2" JIC one end, 1/2" MPT the other Converts between hose and pipe thread Specifications Material: Steel End 1: 1/2"...

The ArmorThane 1/2" JIC x 1/4" JIC ISO hose coupler joins a 1/2" JIC ISO hose connection to a 1/4" JIC connection, for stepping hose size on the A-side.Features Reducing coupler: 1/2" JIC to 1/4" JIC For the ISO (A-side) line Useful when transitioning...

The ArmorThane 1/2" JIC x 1/4" MPT steel connector adapts a 1/2" JIC connection down to a 1/4" male pipe thread port.Features Steel construction 1/2" JIC to 1/4" MPT Reduces and adapts in one fitting Specifications Material: Steel End 1: 1/2" JIC End 2:...

The ArmorThane 1/2" x 1/4" BI reducer coupling joins a 1/2" pipe to a 1/4" pipe. BI denotes black iron construction.Features Black iron (BI) Reduces from 1/2" to 1/4" Female-threaded coupling Specifications Material: Black iron Size: 1/2" x 1/4" Type: Reducer coupling Stock number:...

The ArmorThane 1/2" x 3/8" BI reducer coupling connects 1/2" and 3/8" threaded pipe in one black iron fitting.Features Black iron (BI) construction Steps 1/2" down to 3/8" Threaded coupling Specifications Material: Black iron Size: 1/2" x 3/8" Type: Reducer coupling Stock number: FIT303...

The ArmorThane 1/2" x 4" MPT pipe nipple is a 4-inch length of 1/2" pipe threaded male on both ends, used to join and extend threaded fittings.Features 1/2" male pipe thread both ends 4" overall length General-purpose plumbing connector Specifications Size: 1/2" Length: 4"...

The ArmorThane 1/4" 45° street elbow turns a 1/4" threaded line 45 degrees. As a street elbow, it has one male and one female end, so it threads directly into a port without an extra nipple.Features 45° change of direction Street style: male x...

The ArmorThane 1/4" air regulator sets and maintains downstream air pressure for pneumatic equipment, with 1/4" connections.Features Adjustable air pressure control 1/4" port size Steady air supply for consistent spraying Specifications Port size: 1/4" Type: Compressed air pressure regulator Stock number: FIT207 Typical usesAir...

The ArmorThane 1/4" ball valve provides quick quarter-turn on/off control in a 1/4" threaded line.Features Quarter-turn shutoff 1/4" threaded connections Clear open/closed handle position Specifications Size: 1/4" Type: Ball valve Stock number: FIT163 Typical usesAir lines, sample and bleed points, and small fluid lines...

The ArmorThane 1/4" brass close nipple is a short, fully threaded male x male connector that joins two female fittings as closely as possible.Features Brass construction Close (shortest) nipple length 1/4" male pipe thread both ends Specifications Material: Brass Size: 1/4" Type: Close nipple...

The ArmorThane 1/4" coupler connects two 1/4" lines or fittings on spray equipment and air systems.Features 1/4" size Common shop and rig spare Stocked with matching ArmorThane fittings Specifications Size: 1/4" Type: Coupler Stock number: FIT153 Typical usesAir and fluid connections on proportioners, compressors...

The ArmorThane 1/4" FPT BI tee splits or joins lines with three 1/4" female pipe thread ports in black iron.Features Three 1/4" female pipe thread ports Black iron (BI) construction Adds a branch for a gauge or second line Specifications Material: Black iron Size:...

The ArmorThane 1/4" JIC ISO hose coupler joins 1/4" JIC ISO (A-side) hose connections, typically on whip or gun hoses.Features 1/4" JIC connections For the ISO (A-side) line Handy spare for whip hose repairs Specifications Size: 1/4" JIC Side: ISO / A-side Type: Hose...

The ArmorThane 1/4" JIC x 1/2" MPT steel connector adapts a 1/4" JIC hose connection to a larger 1/2" male pipe thread port.Features Steel construction 1/4" JIC to 1/2" MPT Connects small hose to larger ports Specifications Material: Steel End 1: 1/4" JIC End...

The ArmorThane 100 ft x 4-wire remote cable (stock REPL101) connects the remote control to the motor control on ArmorThane low-pressure spray machines, letting the applicator adjust the machine from the work area.Features 100 ft length; also stocked in 30 ft (REPL99) and 50...