armorthane

The 1/4 in QD Coupler x 3/8 in Hose Barb puts a 1/4 in quick-disconnect coupler on the end of 3/8 in hose. Use it to add quick-connect points to compressors, air tools and air supply lines. It makes swapping hoses and tools faster...

ArmorThane's 1/4 in QD Nipple x 3/8 in Hose Barb puts a 1/4 in quick-disconnect plug on the end of 3/8 in hose. It makes swapping hoses and tools faster in the shop and in the field. Use it to add quick-connect points to...

ArmorThane's 1/4 in Tube Steel Cap Nut caps or secures a 1/4 in tube connection. Use it where tubing needs to connect to threaded ports or to other tubing. It works well on tubing for air, gauge and small fluid lines.Features Stocked with ArmorThane's...

This 1/8 in Air Purge Ball Valve opens and closes a 1/8 in air purge line. Use it on the air purge line where you need simple on/off control of purge air. Keep a spare with your other purge and air-line parts.Features Ball valve...

ArmorThane's 1/8 in Brass 90° Street Elbow makes a compact 90-degree turn directly off a 1/8 in threaded port. Use it where a small, corrosion-resistant fitting is needed. It is a good fit for air manifolds, gauges and compact fluid plumbing.Features Compact fitting for...

Use this 1/8 in FPT to 1/4 in MPT Adapter when a job calls for a part that connects a 1/8 in male-threaded part to a 1/4 in female-threaded port. Use it on air, tank and pump plumbing in the shop or on a...

ArmorThane's 1/8 in Mini Male Air Coupler adds a small quick-connect point to a 1/8 in air connection. It makes swapping hoses and tools faster in the shop and in the field. Use it to add quick-connect points to compressors, air tools and air...

The 1/8 in Steel 90° Elbow turns a 1/8 in threaded line 90 degrees. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on hand for repairs and new builds.Features Kept in stock so you can finish...

The 1/8 in Steel Tee splits or joins a 1/8 in threaded line three ways. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray trailer.Features Useful for plumbing tanks,...

ArmorThane's 2 in x 3/4 in Black Iron Bushing reduces a 2 in female port, such as a drum or tank bung, down to 3/4 in. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on hand...

This 2-1/2 in Female Thread Bulkhead Fitting creates a threaded 2-1/2 in pass-through in a tank or panel wall. Use it on air, tank and pump plumbing in the shop or on a spray trailer. It is a basic building block for rig plumbing,...

This 3/4 in Black Iron 90° Street Elbow makes a tight 90-degree turn directly off a 3/4 in threaded port. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray...

The 3/4 in Black Iron Pipe Cross joins four 3/4 in pipe runs at one point. Use it on air, tank and pump plumbing in the shop or on a spray trailer. It is a basic building block for rig plumbing, air manifolds and...

ArmorThane's 3/4 in Black Iron Pipe Nipple joins two 3/4 in female-threaded fittings. Use it on air, tank and pump plumbing in the shop or on a spray trailer. It is a basic building block for rig plumbing, air manifolds and tank connections.Features Kept...

ArmorThane's 3/4 in Black Pipe Tee splits or joins a 3/4 in pipe run three ways. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray trailer.Features Suited to compressed-air...

Use this 3/4 in Full Port Ball Valve when a job calls for a part that shuts off or isolates a 3/4 in line with a quarter turn. Install it to shut off or isolate part of a plumbing run. It is useful at...

The 3/4 in JIC Male x 3/4 in JIC Female Swivel 45° Elbow adds a 45-degree bend between 3/4 in JIC connections, with a swivel female end. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in...

This 3/4 in MPT Close Nipple joins two 3/4 in female-threaded fittings as close together as possible. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on hand for repairs and new builds.Features Useful for plumbing tanks,...

Use this 3/4 in MPT Steel Hex Nipple when a job calls for a part that joins two 3/4 in female-threaded parts, with a hex center for wrenching. Keep spares on hand for repairs and new builds. Use it on air, tank and pump...

ArmorThane's 3/4 in MPT x 3/4 in JIC Male Adapter adapts a 3/4 in female pipe port to a 3/4 in JIC male connection. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in the fluid plumbing...

The 3/4 in x 1/2 in Black Iron Bushing reduces a 3/4 in female port down to a 1/2 in connection. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a...

The 3/4 in x 1/2 in Hose Barb Coupler joins 3/4 in hose to 1/2 in hose. Use it with flexible hose on transfer, drain and air lines. It pairs with a hose clamp for a secure hose connection.Features Stocked with ArmorThane's hose and...

ArmorThane's 3/4 in x 1/4 in Black Iron Bushing reduces a 3/4 in female port down to a 1/4 in connection. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on hand for repairs and new builds.Features...