pmc

The PMC PH-55 is PMC's highest-output foam proportioner, rated to 2,500 psi and 55 lb/min for large roofing and commercial projects. Features 55 lb/min output for maximum production 21 kW total heat 120 V hose heat up to 410 ft Specifications Model: PH-55 (SKU...

The PMC PHX-2 is a 3,000 psi high-pressure proportioner for polyurea, polyurethane coatings and spray foam. Features 7.5, 10.5 or 14 kW heater options 70 V, 90 V or 120 V hose transformer options 190°F maximum fluid temperature Specifications Model: PHX-2 (SKU EQU-PHX2) Maximum...

The PMC PHX-25 is a Classic-series hydraulic proportioner rated to 3,000 psi for plural-component coatings, including polyurea, in small to medium production. Features Robust Classic two-heater design 8, 10, 12 or 15 kW dual heater options 190°F maximum fluid temperature Specifications Model: PHX-25 (SKU...

The PMC PHX-40 is a 3,500 psi high-pressure proportioner delivering up to 2.8 gal/min for high-production polyurea and plural-component coatings. Features 15, 18 or 21 kW dual heater options 120 V hose heat for up to 410 ft 190°F maximum fluid temperature Specifications Model:...

The PMC PHX-55 is PMC's highest-output high-pressure proportioner, delivering 3.25 gal/min at up to 3,500 psi for large polyurea and coatings jobs. Features 3.25 gal/min output 21 kW heat standard 120 V hose heat 190°F maximum fluid temperature Specifications Model: PHX-55 (SKU EQU-PHX55) Maximum...

The PMC PK-25 is a compact air-driven proportioner suited to residential spray foam insulation and polyurethane slab lifting. Features High-efficiency air motor drive 7.5 kW single heater 70 V hose heat for up to 210 ft Compact 300 lb footprint for smaller rigs Specifications...

The PMC PKX-25 is an air-driven, 3,000 psi proportioner that brings high-pressure coatings capability to smaller rigs. Features Air-driven design 10,500 W total heat 70 V hose heat for up to 210 ft Recirculation valves included in listed packages Specifications Model: PKX-25 (SKU EQU-PKX25)...

The PMC EL-36 power disconnect is a replacement main disconnect for the electrical enclosure of PMC plural-component spray foam and polyurea proportioners.Features Isolates incoming power to the machine for safe service Replace a damaged, loose or failing disconnect before it causes downtime Genuine PMC...

The PMC Premier is a high-output hydraulic spray foam proportioner with a touch screen, remote capability and job data recording for residential and commercial work. Features Touch screen and remote capabilities Data recording and reports in an intuitive interface 18 kW total dual heater...

The PMC Premier Mach 2 is a patent-pending dual-gun proportioner that lets two applicators spray at the same time while maintaining on-ratio pressure. Features Sprays two guns simultaneously on ratio Supports up to two 02 (or equivalent) chambers 18 kW dual heater with dual...

The PMC Premier X is a 3,500 psi high-output proportioner for polyurea waterproofing, decking and protective liners. Features 2.8 gal/min output at up to 3,500 psi 21 kW total dual heater 120 V hose heat up to 410 ft Specifications Model: Premier X (SKU...

The PMC HI-00035 pressure gauge is the 0–5000 psi (345 bar) fluid pressure gauge used on PMC PHX-series high-pressure proportioners.Features Shows material pressure so operators can spot pressure imbalance, a key sign of off-ratio spraying 0–5000 psi scale suited to PHX high-pressure polyurea and...

The PMC EL-195 is a 0–5000 psi pressure transducer that sends a material pressure signal to the controls of PMC plural-component proportioners.Features Electronic pressure sensing for the machine's display and controls 0–5000 psi range for high-pressure foam and polyurea work Replace a transducer that...

The PMC EL-34 primary heat solid state relay switches power to the primary heaters on PMC PH-series proportioners, letting the temperature controller hold your A and R materials at set temperature.Features Solid state switching with no contacts to burn or pit Rated 50 A...

The PMC PU-05025 discharge ball is the outlet check ball of the PMC proportioning pump. It seals against the PU-05024 discharge ball seat on each stroke.Features Controls one-way flow out of the pump on the pressure stroke Replace with the seat when you see...

The PMC PU-05024 discharge ball seat is the outlet check seat in the PMC proportioning pump that the PU-05025 discharge ball closes against.Features Provides the sealing surface for the discharge check Worn or chipped seats cause pressure loss and ratio problems Genuine PMC part,...

The PMC PU-05020 inlet ball is the intake check ball of the PMC proportioning pump, sealing against the PU-05019 inlet ball seat.Features Lets material into the pump on the intake stroke and seals on the pressure stroke A worn or stuck inlet ball causes...

The PMC PU-05019 inlet ball seat is the intake check seat in the PMC proportioning pump that the PU-05020 inlet ball seals against.Features Sealing surface for the inlet check valve Replace when pitted, chipped or worn to stop pressure dive on the intake side...

The PMC PU-05021 pump spring is the check valve spring used with the inlet ball and seat in PMC proportioning pumps.Features Helps the check ball return and seat consistently A weak or broken spring can cause erratic pressure and poor fill Low-cost part worth...

The PMC PU-05026 tie rod is the 3/8-24 threaded rod that clamps the proportioning pump assembly together on PMC PH/PHX-series proportioners.Features Holds pump components in alignment under spraying pressure Replace bent or thread-damaged rods during pump service Used across multiple PMC pump sizes Genuine...

The PMC 202221 retaining nut secures the pump base components on PMC proportioning pumps.Features Holds the pump base assembly together Replace if threads are damaged or the nut is cracked Often serviced alongside the 202305 split-sleeve pump base kit Genuine PMC part Specifications Part...

The PMC 202305 pump base kit is PMC's split-sleeve pump base upgrade kit for PMC proportioning pumps. It was previously sold under PMC part number PU-05022A.Features Upgrades the pump base to PMC's split-sleeve design Pairs with related PMC pump base parts such as the...

The PMC PU-05007 pump clevis pin is the pin that secures the clevis connection in the pumpline assembly of PMC PH/PHX-series hydraulic proportioners.Features Holds the clevis joint between the hydraulic drive and the pumpline Replace a worn or bent pin to remove play in...