Spray Equipment

The BEKO Membrane Drier Filter (SUP159) is a replacement filter element for BEKO membrane air driers used to supply clean, dry compressed air to ArmorThane low-pressure spray equipment. Features Scheduled maintenance item for membrane air driers Helps protect the membrane and downstream equipment Supports...

The ArmorThane Air Dryer Assembly, Non-MCU (PKG107) removes moisture from compressed air supplied to low-pressure spray equipment. Dry air helps protect moisture-sensitive isocyanate and keeps air-driven components working properly. Features Dries compressed air for coating equipment Helps prevent moisture contamination of ISO material Non-MCU...

The ArmorThane Air Motor Assembly (PKG122) is a complete replacement air motor for ArmorThane low-pressure spray equipment, supplied as an assembly for faster repairs. Features Complete assembly for quicker swap-out Restores pumping performance on worn machines Genuine ArmorThane replacement assembly Specifications Stock number: PKG122...

The ArmorThane 100 ft x 3/8 in Insulated Line Set (PKG116A) is a long-reach hose set for ArmorThane low-pressure spray equipment, with insulation to help hold material temperature over the full 100 ft run. Features 100 ft reach for large floors, trailers and job...

The ArmorThane 100 ft x 3/8 in Line Set, Prebuilt (PKG116) gives low-pressure spray systems a full 100 ft of reach, assembled and ready to connect. Features Pre-built and ready to connect for faster setup 100 ft length for big floors and hard-to-reach areas...

The ArmorThane 50 ft x 3/8 in Line Set, Prebuilt (PKG115) is a ready-to-connect hose set for ArmorThane low-pressure equipment, balancing reach with the flow of a 3/8 in hose. Features Pre-built and ready to connect for faster setup 50 ft length suits most...

The ArmorThane 50 ft x 1/4 in Line Set Assembly (PKG114) is a complete hose assembly for ArmorThane low-pressure spray equipment. The 1/4 in hose is lighter and more flexible to drag around vehicles and parts. Features Complete assembly, ready to install Smaller 1/4...

The ArmorThane 30 ft x 3/8 in Line Set (PKG113) is a compact hose set for ArmorThane low-pressure spray equipment, ideal for in-shop bedliner bays and work close to the machine. Features Short 30 ft length is easy to manage and clean Less hose...

The ArmorThane Covered Line Set with Thermocouple (PKG147) is a pre-assembled, covered hose set that includes a thermocouple (TC) so the proportioner can monitor material temperature in the hose. Features Integrated thermocouple for hose temperature monitoring Protective cover for durability on the job Pre-assembled...

The ArmorThane Covered HP Line Set without Thermocouple (PKG146) is a pre-assembled high-pressure hose set with a protective cover, used to carry A- and B-side material from the proportioner toward the gun on plural-component spray rigs. Features Pre-assembled line set for faster rig setup...

ArmorThane HP Feed Hoses (HOS117) carry material from the drum transfer pumps to the inlets of a plural-component proportioner, a key link in keeping your machine properly fed. Features Feed-side hoses for A and B material supply Replace worn, stiff or contaminated feed hoses...

The PFX (EQU508) is a plural-component proportioner offered in ArmorThane's high-pressure equipment lineup for spray foam and coatings applicators. Specifications Stock number: EQU508 FAQ How do I get full specifications? Call ArmorThane at (417) 831-5090 for the current configuration, output and power requirements, and...

The ArmorThane HighLine 4011-HP is a 1:1 ratio high-pressure plural-component spray system in ArmorThane's HighLine equipment line, built for applicators spraying polyurea protective coatings in production settings. Features Fixed 1:1 mix ratio for plural-component coatings High-pressure impingement mix for fast-set materials Supported by ArmorThane's...

The ArmorThane HighLine 2511-HP is a 1:1 ratio high-pressure plural-component spray system from ArmorThane's HighLine equipment line, set up for spraying 1:1 ratio plural-component polyurea and polyurethane coatings. Features 1:1 mix ratio for plural-component polyurea and polyurethane coatings High-pressure impingement mixing for fast-set materials...

The EQU-REF refrigerated unit is a refrigerated air-drying component for spray rig compressed-air systems, used to reduce moisture before air reaches guns and pumps.Benefits Drier compressed air for plural-component gun purge Helps limit moisture reaching moisture-sensitive coatings Replacement or add-on for rig air systems...

The ArmorThane HighLine Whip Hose Set (HOS118) is the short, flexible hose section that connects the main line set to the spray gun on ArmorThane HighLine high-pressure equipment, improving gun handling and reducing operator fatigue. Features Flexible whip for easier gun maneuvering Paired A...

The Graco Probler P2 Gun is a proven plural-component spray gun for polyurea, polyurethane coatings and spray foam. Its double-piston design and replaceable mix chamber insert make it a workhorse for daily production spraying. Features Double-piston design delivers more than 300 lb (136 kg)...

The PMC PKX-25 is an air-driven, 3,000 psi proportioner that brings high-pressure coatings capability to smaller rigs. Features Air-driven design 10,500 W total heat 70 V hose heat for up to 210 ft Recirculation valves included in listed packages Specifications Model: PKX-25 (SKU EQU-PKX25)...

The PMC PHX-55 is PMC's highest-output high-pressure proportioner, delivering 3.25 gal/min at up to 3,500 psi for large polyurea and coatings jobs. Features 3.25 gal/min output 21 kW heat standard 120 V hose heat 190°F maximum fluid temperature Specifications Model: PHX-55 (SKU EQU-PHX55) Maximum...

The PMC PHX-25 is a Classic-series hydraulic proportioner rated to 3,000 psi for plural-component coatings, including polyurea, in small to medium production. Features Robust Classic two-heater design 8, 10, 12 or 15 kW dual heater options 190°F maximum fluid temperature Specifications Model: PHX-25 (SKU...