Shop All

The Graco Fine Finish Flat Tip 163108 (size 108) is a precision airless spray tip held to Graco's tightest cut tolerance, built for high-quality industrial fine-finish work. Features Precision-cut orifice for a consistent, even pattern Made for high-quality industrial fine-finish applications Very small orifice...

The PMC Diamond-Plated Mixing Chamber #01 (GU-814-DP-01) is the replacement mix chamber for the PMC Xtreme spray gun, where both components impinge and mix before leaving the gun. Features Diamond plating with 36% higher scratch resistance, per PMC PMC reports up to 60 sets...

The Graco LineLazer RAC 5 SwitchTip LL5213 is a reversible striping tip that creates clean, laser-sharp lines with no fuzzy edges or thin spots on Graco LineLazer line stripers. Features Sharp line edges with consistent paint thickness from edge to edge Less overspray and...

The Graco 261821 Power-Lock splice kit is used to connect Graco Power-Lock heated hoses, joining the heating wires between hose sections.Features Molded connectors for secure, insulated wire connections Includes oxide inhibitor to protect copper connections Everything needed for the splice, including the hex wrench...

The PMC 50' TSU Wire Harness (MA-00006A) is a 50 ft extension wire that carries the temperature sensing unit (TSU) signal along a heated hose run back to the proportioner. Specifications Part number: MA-00006A Length: 50 ft Type: TSU extension wire harness Compatibility PMC...

The Graco Power-Lock Heated Hose 246074 is a 50 ft section of 2000 psi heated hose for Graco Reactor proportioners, the go-to length for building out a spray foam or coatings hose bundle. Features Multi-strand copper heating element for long flex life and uniform...

The Graco Power-Lock Heated Hose 26C193 is a 3/8 in ID x 25 ft, 3500 psi heated hose for Graco Reactor proportioners. The larger bore and higher pressure rating suit high-output polyurea and coatings work. Note: This hose does not include a scuff jacket...

The Graco Reactor 2 Internally Heated Hose 26D095 is a 3/8 in x 50 ft, 2000 psi hose with the heating element inside the fluid path, delivering faster heat-up, lighter weight and better flexibility than traditional externally heated hose. Features Faster heat-up and lighter...

The Graco 25P770 is a 1/4 in x 10 ft LP Reactor whip hose rated at 2000 psi (138 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...

The PMC 1/4" x 25' High-Pressure Whip Hose (MA-00040A-25) gives extra reach at the gun end of a heated hose run, so applicators can move without dragging the full hose bundle. Specifications Part number: MA-00040A-25 Size: 1/4 in x 25 ft Maximum working pressure:...

The Graco Power-Lock Heated Hose 249587 is a 25 ft, 2000 psi plural-component heated hose designed for Graco Reactor proportioners. It keeps A- and B-side material at temperature all the way to the gun for consistent mixing and spray quality. Features Multi-strand copper heating...

The Graco RAC X Fine Finish Low Pressure SwitchTip FFLP108 lets you spray at up to 50% lower pressure, producing less overspray, easier pattern overlap and up to twice the life of a regular tip. It is ideal for thinner materials and fine-finish work....

The Graco RAC X SwitchTip is Graco's reversible airless spray tip for residential, commercial and industrial painting. This listing covers the small 2-8 in fan sizes (base SKU LTX207); flip the tip to clear clogs without removing the guard. Features Long-lasting fan pattern with...

The PMC Coupling Block Flush Kit, F-AP (200218) is a flushing kit that connects at the coupling block of PMC air-purge spray guns for solvent cleaning. Specifications Part number: 200218 Type: Coupling-block flush kit Compatibility PMC air-purge guns. Call (417) 831-5090 to confirm fit...

The Graco 25P773 is a 1/4 in x 20 ft HP Reactor whip hose rated at 3500 psi (240 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...

The Graco Contractor Flat Tip 269211 (size 211) is a flat airless spray tip designed for narrower surfaces and thin materials, such as trim, doors and railings. Features Narrow fan pattern for controlled coverage on small areas Small orifice suited to thin materials Flat...

The Graco RAC X Wide RAC SwitchTip WR1221 covers double the area in the same time, with increased flow to maintain proper mil build. It is made for high-production new-construction work that may require larger airless sprayers. Features Wide fan doubles coverage per pass...

The Graco Power-Lock Heated Hose 246052 is a 50 ft, 3500 psi heated hose for Graco Reactor proportioners, rated for the higher pressures used when spraying polyurea and other fast-set coatings. Features Multi-strand copper heating element, up to 10x the flex life of the...

The Graco Xcelerator Whip Hose 25P775 is a 1/4 in x 10 ft, 2000 psi high-flex heated whip for Graco Reactor 3 systems. It sits between the Xcelerator hose bundle and the gun to make maneuvering easier and reduce operator fatigue. Features High-flex construction...

The Graco 261669 is a thermocouple fluid temperature sensor (FTS) kit with coupler for Graco Reactor heated hose sets. Installed near the whip, it reports material temperature so the Reactor can control hose heat.Features Thermocouple sensing for accurate, reliable temperature feedback Supplied with coupler...

The Graco 24J523 is a 50 ft (15 m) thermocouple fluid temperature sensor (FTS) cable that carries the temperature signal along the heated hose to the Graco Reactor's hose heat controls.Features Provides the feedback the Reactor needs to control hose heat accurately and safely...

The Graco RAC XHD SwitchTip in large fan sizes (base SKU XHD711) is a heavy-duty carbide airless tip for spraying high-solids protective coatings at high pressure, rated up to 7250 psi. Features Reverse-A-Clean design clears clogs quickly Change tip sizes in seconds without removing...

The Graco RAC X Low Pressure SwitchTip LP313 is a high-production reversible tip that sprays at up to 50% lower pressure, producing a 6 to 8 in fan through a 0.013 in orifice. Reverse the tip to clear clogs. Features Made for large surfaces...