Hoses & Heated Hoses

The Graco 25P770 is a 1/4 in x 10 ft LP Reactor whip hose rated at 2000 psi (138 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...

The Graco 25P771 is a 1/4 in x 20 ft LP Reactor whip hose rated at 2000 psi (138 bar), built with Graco's Improved Flex design and an Xtreme-Wrap scuff guard. It is the flexible final section between the heated hose and the spray...

The Graco Reactor Heated Whip Hose 249586 is a short 1/4 in x 3 ft, 2000 psi heated whip that provides a flexible, heated final connection between the main hose bundle and the spray gun. Features Multi-strand copper heating element for long flex life...

The PMC 50' TSU Wire Harness (MA-00006A) is a 50 ft extension wire that carries the temperature sensing unit (TSU) signal along a heated hose run back to the proportioner. Specifications Part number: MA-00006A Length: 50 ft Type: TSU extension wire harness Compatibility PMC...

The PMC TSU (Temperature Sensing Unit) Block Assembly (EL-51A-4) measures fluid temperature in a PMC heated hose so the proportioner can control hose heat accurately. Features Designed for a smaller hose bundle diameter at the TSU connection Consolidates the chemical and air hose connections...

The PMC 1/4" x 25' High-Pressure Whip Hose (MA-00040A-25) gives extra reach at the gun end of a heated hose run, so applicators can move without dragging the full hose bundle. Specifications Part number: MA-00040A-25 Size: 1/4 in x 25 ft Maximum working pressure:...

The PMC 1/4" x 10' High-Pressure Whip Hose (MA-00040A) is the flexible end section between the heated hose and the spray gun, giving the applicator lighter, easier gun handling. Specifications Part number: MA-00040A Size: 1/4 in x 10 ft Maximum working pressure: 3,500 psi...

The PMC 1/2" x 50' High-Pressure Heated Hose (200024) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...

The PMC 3/8" x 50' High-Pressure Heated Hose (MA-00039A) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element No...

The PMC 3/8" x 50' High-Pressure Heated Hose (MA-00039A-TC) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element No...

The PMC 3/8" x 50' High-Pressure Heated Hose (200007) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...

The PMC 3/8" x 50' High-Pressure Heated Hose (200004) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...

The PMC 3/8" x 50' High-Pressure Heated Hose (200008) keeps A and B chemical at spray temperature between a PMC proportioner and the gun, using a copper-weave heating element. Features Rated to 3,500 psi (241 bar) for foam and polyurea Copper-weave heating element Scuff...

The Graco 18E175 is the fluid temperature sensor (FTS) kit for Graco Reactor 3 heated hoses. It measures material temperature in the dual hose set so the Reactor 3 can control hose heat.Features RTD (resistance temperature detector) sensing for accurate readings Designed for the...