Fittings & Couplers

The ArmorThane 1/2" JIC x 1/4" JIC ISO hose coupler joins a 1/2" JIC ISO hose connection to a 1/4" JIC connection, for stepping hose size on the A-side.Features Reducing coupler: 1/2" JIC to 1/4" JIC For the ISO (A-side) line Useful when transitioning...

The ArmorThane 1/2" JIC x 1/4" MPT steel connector adapts a 1/2" JIC connection down to a 1/4" male pipe thread port.Features Steel construction 1/2" JIC to 1/4" MPT Reduces and adapts in one fitting Specifications Material: Steel End 1: 1/2" JIC End 2:...

The ArmorThane 1/2" x 1/4" BI reducer coupling joins a 1/2" pipe to a 1/4" pipe. BI denotes black iron construction.Features Black iron (BI) Reduces from 1/2" to 1/4" Female-threaded coupling Specifications Material: Black iron Size: 1/2" x 1/4" Type: Reducer coupling Stock number:...

The ArmorThane 1/2" x 3/8" BI reducer coupling connects 1/2" and 3/8" threaded pipe in one black iron fitting.Features Black iron (BI) construction Steps 1/2" down to 3/8" Threaded coupling Specifications Material: Black iron Size: 1/2" x 3/8" Type: Reducer coupling Stock number: FIT303...

The ArmorThane 1/2" x 4" MPT pipe nipple is a 4-inch length of 1/2" pipe threaded male on both ends, used to join and extend threaded fittings.Features 1/2" male pipe thread both ends 4" overall length General-purpose plumbing connector Specifications Size: 1/2" Length: 4"...

The ArmorThane 1/4" 45° street elbow turns a 1/4" threaded line 45 degrees. As a street elbow, it has one male and one female end, so it threads directly into a port without an extra nipple.Features 45° change of direction Street style: male x...

The ArmorThane 1/4" air regulator sets and maintains downstream air pressure for pneumatic equipment, with 1/4" connections.Features Adjustable air pressure control 1/4" port size Steady air supply for consistent spraying Specifications Port size: 1/4" Type: Compressed air pressure regulator Stock number: FIT207 Typical usesAir...

The ArmorThane 1/4" ball valve provides quick quarter-turn on/off control in a 1/4" threaded line.Features Quarter-turn shutoff 1/4" threaded connections Clear open/closed handle position Specifications Size: 1/4" Type: Ball valve Stock number: FIT163 Typical usesAir lines, sample and bleed points, and small fluid lines...

The ArmorThane 1/4" brass close nipple is a short, fully threaded male x male connector that joins two female fittings as closely as possible.Features Brass construction Close (shortest) nipple length 1/4" male pipe thread both ends Specifications Material: Brass Size: 1/4" Type: Close nipple...

The ArmorThane 1/4" coupler connects two 1/4" lines or fittings on spray equipment and air systems.Features 1/4" size Common shop and rig spare Stocked with matching ArmorThane fittings Specifications Size: 1/4" Type: Coupler Stock number: FIT153 Typical usesAir and fluid connections on proportioners, compressors...

The ArmorThane 1/4" FPT BI tee splits or joins lines with three 1/4" female pipe thread ports in black iron.Features Three 1/4" female pipe thread ports Black iron (BI) construction Adds a branch for a gauge or second line Specifications Material: Black iron Size:...

The ArmorThane 1/4" JIC ISO hose coupler joins 1/4" JIC ISO (A-side) hose connections, typically on whip or gun hoses.Features 1/4" JIC connections For the ISO (A-side) line Handy spare for whip hose repairs Specifications Size: 1/4" JIC Side: ISO / A-side Type: Hose...

The ArmorThane 1/4" JIC x 1/2" MPT steel connector adapts a 1/4" JIC hose connection to a larger 1/2" male pipe thread port.Features Steel construction 1/4" JIC to 1/2" MPT Connects small hose to larger ports Specifications Material: Steel End 1: 1/4" JIC End...

ArmorThane's Brass Bushing, 1 in MPT x 3/4 in FPT reduces a 1 in female port to accept a 3/4 in male-threaded part. Use it where a small, corrosion-resistant fitting is needed. It is a good fit for air manifolds, gauges and compact fluid...

The Brass Coupler, 3/4 in FWH x 3/4 in MPT adapts a 3/4 in female hose-thread connection to a 3/4 in male pipe thread. It is a good fit for air manifolds, gauges and compact fluid plumbing. Use it where a small, corrosion-resistant fitting...

ArmorThane's Brass Tee, 1/4 in x 1/4 in x 1/8 in FPT branches a 1/4 in line with a 1/8 in outlet, handy for adding a gauge or sensor. Use it where a small, corrosion-resistant fitting is needed. It is a good fit for...

The Carlisle 336397 QD coupler is the air-line quick-disconnect coupler for the Carlisle ST1 air-purge spray foam gun, letting you connect and disconnect gun air quickly. The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336397 Air-line quick-disconnect coupler...

The Carlisle 336738 grease fitting is the replacement grease (zerk) fitting for the Carlisle ST1 spray foam gun, used for routine gun lubrication. The ST1 is designed for single-tool field maintenance.Features Genuine Carlisle part 336738 Grease fitting for gun lubrication Replace if damaged or...

The Carlisle 336335 pipe plug is a genuine replacement plug for the Carlisle ST1 spray foam gun, used to seal a port on the gun. The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336335 Threaded pipe plug for...

The Carlisle 336357 swivel adapter (A-side) is the ISO-side swivel fitting for the Carlisle ST1 air-purge spray foam gun, sold separately from the B-side adapter (336358). The ST1 is rated to 3,500 psi and 200°F fluid temperature.Features Genuine Carlisle part 336357 A-side (ISO) swivel...

The Carlisle 336358 swivel adapter (B-side) is the resin-side swivel fitting for the Carlisle ST1 spray foam gun, the counterpart to the A-side adapter 336357. The ST1 is designed for single-tool field maintenance.Features Genuine Carlisle part 336358 B-side (resin/poly) swivel adapter A-side version: 336357...

The Crimp Hose Fitting, 1/2 in JIC x 3/8 in provides a 1/2 in JIC end on a crimped hose assembly (3/8 in size as listed). Crimp it onto the matching hose to build a finished hose assembly. Use it to make replacement fluid...

This Crimp Hose Fitting, 1/4 in JIC x 1/4 in provides a 1/4 in JIC end on a crimped hose assembly (1/4 in size as listed). Use it to make replacement fluid hoses to the length you need. Crimp it onto the matching hose...