Products

The Amaano 248135-R large piston o-ring kit is a replacement seal for the large piston of the Graco Fusion AP air purge gun. Features Matches the Graco Fusion AP large piston position (Graco part 248135) Field-tested by spray foam contractors in addition to lab...

Amaano 248136-D supplies air cylinder cap o-rings for the air cylinder cap on Graco Fusion AP guns, ready for scheduled rebuilds. Features Matches the Graco Fusion AP air cylinder cap position (Graco part 248136) Field-tested by spray foam contractors in addition to lab testing,...

Amaano Air Cylinder Cap O-Ring, Reusable (248136-R) is an aftermarket o-ring for the air cylinder cap position on Graco Fusion AP spray foam guns. Features Matches the Graco Fusion AP air cylinder cap position (Graco part 248136) Field-tested by spray foam contractors in addition...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Teflon Air Cap O-Ring, Reusable (248137-R), made for the gun's air cap. Features Matches the Graco Fusion AP air cap position (Graco part 248137) Field-tested by spray foam contractors in addition to lab...

The ArmorThane 1/2 in jaw coupler with keyway (stock SPR131) is one half of the jaw-type drive coupling that connects the motor to the material pump on ArmorThane low-pressure spray machines.Features 1/2 in size with keyway to lock onto the shaft Works with the...

The ArmorThane 1/2" FPT female bulkhead fitting creates a threaded pass-through in a tank, drum or panel wall, giving you 1/2" female pipe thread connections on the fitting.Features 1/2" female pipe thread (FPT) connection Bulkhead style for mounting through a wall Stocked for spray...

The ArmorThane 1/2" JIC ISO hose coupler joins sections of ISO (A-side) hose with 1/2" JIC connections, used when building or repairing plural-component hose sets.Features 1/2" JIC connections For the ISO (A-side) hose line Keeps spare hose sections ready to connect Specifications Size: 1/2"...

The ArmorThane 1/2" JIC x 1/2" MPT steel connector adapts a 1/2" JIC hose connection to a 1/2" male pipe thread port.Features Steel construction 1/2" JIC one end, 1/2" MPT the other Converts between hose and pipe thread Specifications Material: Steel End 1: 1/2"...

The ArmorThane 1/2" JIC x 1/4" JIC ISO hose coupler joins a 1/2" JIC ISO hose connection to a 1/4" JIC connection, for stepping hose size on the A-side.Features Reducing coupler: 1/2" JIC to 1/4" JIC For the ISO (A-side) line Useful when transitioning...

The ArmorThane 1/2" JIC x 1/4" MPT steel connector adapts a 1/2" JIC connection down to a 1/4" male pipe thread port.Features Steel construction 1/2" JIC to 1/4" MPT Reduces and adapts in one fitting Specifications Material: Steel End 1: 1/2" JIC End 2:...

The ArmorThane 1/2" x 1/4" BI reducer coupling joins a 1/2" pipe to a 1/4" pipe. BI denotes black iron construction.Features Black iron (BI) Reduces from 1/2" to 1/4" Female-threaded coupling Specifications Material: Black iron Size: 1/2" x 1/4" Type: Reducer coupling Stock number:...

The ArmorThane 1/2" x 3/8" BI reducer coupling connects 1/2" and 3/8" threaded pipe in one black iron fitting.Features Black iron (BI) construction Steps 1/2" down to 3/8" Threaded coupling Specifications Material: Black iron Size: 1/2" x 3/8" Type: Reducer coupling Stock number: FIT303...

The ArmorThane 1/2" x 4" MPT pipe nipple is a 4-inch length of 1/2" pipe threaded male on both ends, used to join and extend threaded fittings.Features 1/2" male pipe thread both ends 4" overall length General-purpose plumbing connector Specifications Size: 1/2" Length: 4"...

The ArmorThane 1/4" 45° street elbow turns a 1/4" threaded line 45 degrees. As a street elbow, it has one male and one female end, so it threads directly into a port without an extra nipple.Features 45° change of direction Street style: male x...

The ArmorThane 1/4" air regulator sets and maintains downstream air pressure for pneumatic equipment, with 1/4" connections.Features Adjustable air pressure control 1/4" port size Steady air supply for consistent spraying Specifications Port size: 1/4" Type: Compressed air pressure regulator Stock number: FIT207 Typical usesAir...

The ArmorThane 1/4" ball valve provides quick quarter-turn on/off control in a 1/4" threaded line.Features Quarter-turn shutoff 1/4" threaded connections Clear open/closed handle position Specifications Size: 1/4" Type: Ball valve Stock number: FIT163 Typical usesAir lines, sample and bleed points, and small fluid lines...

The ArmorThane 1/4" brass close nipple is a short, fully threaded male x male connector that joins two female fittings as closely as possible.Features Brass construction Close (shortest) nipple length 1/4" male pipe thread both ends Specifications Material: Brass Size: 1/4" Type: Close nipple...

The ArmorThane 1/4" coupler connects two 1/4" lines or fittings on spray equipment and air systems.Features 1/4" size Common shop and rig spare Stocked with matching ArmorThane fittings Specifications Size: 1/4" Type: Coupler Stock number: FIT153 Typical usesAir and fluid connections on proportioners, compressors...

The ArmorThane 1/4" FPT BI tee splits or joins lines with three 1/4" female pipe thread ports in black iron.Features Three 1/4" female pipe thread ports Black iron (BI) construction Adds a branch for a gauge or second line Specifications Material: Black iron Size:...

The ArmorThane 1/4" JIC ISO hose coupler joins 1/4" JIC ISO (A-side) hose connections, typically on whip or gun hoses.Features 1/4" JIC connections For the ISO (A-side) line Handy spare for whip hose repairs Specifications Size: 1/4" JIC Side: ISO / A-side Type: Hose...

The ArmorThane 1/4" JIC x 1/2" MPT steel connector adapts a 1/4" JIC hose connection to a larger 1/2" male pipe thread port.Features Steel construction 1/4" JIC to 1/2" MPT Connects small hose to larger ports Specifications Material: Steel End 1: 1/4" JIC End...

The ArmorThane 100 ft x 4-wire remote cable (stock REPL101) connects the remote control to the motor control on ArmorThane low-pressure spray machines, letting the applicator adjust the machine from the work area.Features 100 ft length; also stocked in 30 ft (REPL99) and 50...

The ArmorThane 100 ft x 3/8 in Insulated Line Set (PKG116A) is a long-reach hose set for ArmorThane low-pressure spray equipment, with insulation to help hold material temperature over the full 100 ft run. Features 100 ft reach for large floors, trailers and job...