Products

Use this 3/4 in x 2 in Black Iron Pipe Nipple when a job calls for a part that adds a 2 in length of 3/4 in pipe between two female-threaded fittings. Keep spares on hand for repairs and new builds. Use it on...

This 3/4 in x 3/4 in Hose Barb Coupler splices two lengths of 3/4 in hose together. It pairs with a hose clamp for a secure hose connection. Use it with flexible hose on transfer, drain and air lines.Features Barbed end grips the inside...

ArmorThane's 3/4 in x 3/8 in Black Iron Bushing reduces a 3/4 in female port down to a 3/8 in connection. Use it on air, tank and pump plumbing in the shop or on a spray trailer. It is a basic building block for...

Use this 3/4 in Y-Strainer, 40 Mesh when a job calls for a part that catches debris in a 3/4 in line with a 40-mesh screen before it reaches pumps and valves. Install it on the inlet side of a pump or in a...

ArmorThane's 3/8 in Black Iron 90° Street Elbow makes a tight 90-degree turn directly off a 3/8 in threaded port. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray...

Use this 3/8 in Black Iron Close Nipple when a job calls for a part that joins two 3/8 in female-threaded fittings as close together as possible. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on...

Use this 3/8 in Black Iron Pipe Locknut when a job calls for a part that locks a 3/8 in threaded pipe or fitting in place through a panel or tank wall. Keep spares on hand for repairs and new builds. Use it on...

The 3/8 in Black Iron Tee, FPT All Ends splits or joins a 3/8 in pipe run three ways with female threads on every end. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on hand for...

This 3/8 in Compression Air Line Coupler joins two lengths of 3/8 in air-line tubing. Use it where tubing needs to connect to threaded ports or to other tubing. It works well on tubing for air, gauge and small fluid lines.Features Handy for air...

Use this 3/8 in Compression x 1/4 in MPT Brass Connector when a job calls for a part that connects 3/8 in tubing to a 1/4 in female pipe port. It works well on tubing for air, gauge and small fluid lines. Use it...

ArmorThane's 3/8 in Compression x 1/8 in MPT Brass Connector connects 3/8 in tubing to a 1/8 in female pipe port. Use it where tubing needs to connect to threaded ports or to other tubing. It works well on tubing for air, gauge and...

Use this 3/8 in Hose Barb Coupler when a job calls for a part that splices two lengths of 3/8 in hose together. Use it with flexible hose on transfer, drain and air lines. It pairs with a hose clamp for a secure hose...

The 3/8 in JIC Resin Hose Coupler joins 3/8 in JIC resin hose sections. Keep a few on hand for hose changes and rig repairs. Use it when plumbing hoses to pumps, manifolds and fluid-handling components.Features JIC connections seal on a 37° flare seat,...

The 3/8 in JIC Steel 90° Elbow makes a 90-degree turn in a 3/8 in JIC line. It is a common piece in the fluid plumbing of spray rigs and transfer systems. Keep a few on hand for hose changes and rig repairs.Features Reusable...

This 3/8 in JIC x 1/2 in MPT Steel Connector adapts a 3/8 in JIC hose end to a 1/2 in female pipe port. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in the fluid plumbing...

Use this 3/8 in JIC x 1/4 in MPT Steel Connector when a job calls for a part that adapts a 3/8 in JIC hose end to a 1/4 in female pipe port. It is a common piece in the fluid plumbing of spray...

The 3/8 in Steel Cap Nut caps or secures a 3/8 in tube connection. It works well on tubing for air, gauge and small fluid lines. Use it where tubing needs to connect to threaded ports or to other tubing.Features Compression connection grips the...

ArmorThane's 3/8 in Swivel Hose Barb Coupler connects 3/8 in hose with a swivel that helps keep the hose from kinking or twisting. It pairs with a hose clamp for a secure hose connection. Use it with flexible hose on transfer, drain and air...

This 3/8 in Tube Female Swivel 90° Elbow makes a 90-degree turn on a 3/8 in tube line with a female swivel end. Use it where tubing needs to connect to threaded ports or to other tubing. It works well on tubing for air,...

This 3/8 in x 1/4 in Black Iron Reducer steps a 3/8 in pipe connection down to 1/4 in. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray trailer.Features...

ArmorThane's 3/8 in x 3 in Black Iron Pipe Nipple extends a 3/8 in pipe run by 3 inches between two female-threaded fittings. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or...

The 30:1 A/R PHX Pump (EQU-PHX30) is part of ArmorThane's high-pressure spray equipment lineup for polyurea and polyurethane applicators. Specifications Stock number: EQU-PHX30 Ratio (as listed): 30:1 Compatibility Because pump configurations vary by machine, please call ArmorThane at (417) 831-5090 with your equipment model...

PRE106 36-inch masking paper covers wide areas quickly when masking vehicles, walls, floors and equipment before spraying polyurea, bedliners or topcoats.Features 36" width covers large panels in fewer passes Use with masking tape for sharp, protected edges Helps keep overspray off surfaces that should...