Graco

The Graco 15B210 air cap is the front air cap used on round-pattern Graco Fusion AP and Fusion PC plural-component spray guns (ref. 10). It fits over the mix chamber at the front of the gun and is a common replacement when the cap...

The Graco 15B211 retaining ring is the front retaining ring on the Graco Fusion AP air-purge plural-component spray gun (ref. 9). It holds the front-end components in place and is removed during mix-chamber and air-cap service.Features Genuine Graco retaining ring Fits the Fusion AP...

The Graco 15B214 screw is a 5/16-18 x 1/2 in. (13 mm) screw used in the A- and B-side check valve assemblies of Graco Fusion AP and Fusion PC spray guns (ref. 26b). Replace it if the head is rounded or the threads are...

The Graco 15B215 lock ring is a genuine replacement part for the Graco Fusion AP air-purge plural-component spray gun (ref. 7). Replace it if it is cracked or no longer locks firmly.Features Genuine Graco lock ring Fits the Fusion AP air-purge gun Quick, inexpensive...

The Graco 15B221 bolt (5/16-24) secures the 2-hose fluid manifold (246012) to Graco Fusion AP and Fusion PC plural-component spray guns (ref. 12d). It is included with the manifold and also sold on its own for replacement.Features Genuine Graco manifold bolt Holds the fluid...

The Graco 15B223 cleanoff air valve is the genuine valve that controls cleanoff air on Graco Fusion AP and Fusion PC plural-component guns (ref. 8). Cleanoff air helps keep material from building up on the front of the gun while you spray. It is...

The Graco 15B565 ball valve is a 1/4 npt male-by-female ball valve listed in the tool kit and accessory parts for Graco Fusion AP and Fusion PC plural-component spray guns (ref. 51). It gives the applicator a quick shutoff on the gun air supply.Features...

The Graco 15B679 is a genuine Graco multi-hazard safety warning label for heated hoses.Features Replaces faded, damaged or missing warning labels Keeps hazard information visible to everyone on the job Genuine Graco part number Specifications Part number: 15B679 Brand: Graco Graco description: Label, safety,...

The Graco 15B689 grease fitting cover snaps over the grease fitting on Graco Fusion AP and Fusion PC plural-component spray guns (ref. 37). Keeping the fitting covered helps keep overspray and debris out, so the gun can be greased properly at the end of...

The Graco 15B772 air hose is the short 18 in. air whip that connects the air supply to Graco plural-component spray guns. Graco lists it as the 1/4 NPSM (fbe) air hose on the Probler P2 and as the 18 in. air hose on...

The Graco 15B993 lock ring spring is part of the 2-hose fluid manifold (246012) used on Graco Fusion AP and Fusion PC plural-component spray guns (ref. 12g). Replace it if it is weak, deformed or missing so the manifold and lock ring stay secure.Features...

The Graco 15C480 wave washer is a genuine replacement part listed as ref. 20 in the Graco Fusion AP and Fusion PC spray gun parts lists. Replace it when it is flattened, corroded or lost during gun service.Features Genuine Graco wave washer Used on...

The Graco 15E083 round handle is the round handle sleeve (ref. 15) listed for Graco XTR7 airless spray guns. A fresh sleeve restores a secure, comfortable grip on the gun.Features Genuine Graco round handle sleeve For listed XTR7 and XTR7+ models Replace a worn,...

The Graco 15E085 pin actuator is a genuine Graco replacement part. Order it by part number when your gun's parts list calls for a 15E085 actuator pin.Features Genuine Graco part Ordered by Graco part number for an exact match Replace a bent or worn...

The Graco 15E088 needle retainer is a genuine Graco replacement part that holds the needle in place in the equipment it is designed for. Order it by part number to match your equipment's parts list.Features Genuine Graco needle retainer Ordered by Graco part number...

The Graco 15K365 handle is the genuine replacement handle for Graco Fusion AP and Fusion PC plural-component spray guns (ref. 1 in both parts lists). A cracked or damaged handle affects grip and can compromise the air connection at the base of the gun,...

The Graco 15T897 air valve plug is a genuine Graco replacement part. It is a different part number from the 15B208 air valve plug used on the Fusion AP and Fusion PC guns, so check your gun's parts list before ordering.Features Genuine Graco air...

The Graco 15U395 adapter is a 1/8 in. NPT male x female fitting that appears in the parts lists of both the Graco Probler P2 and the Graco Fusion CS plural-component spray guns, each using two per gun.Features Genuine Graco part 15U395 1/8 in....

The Graco 16A037 machined handle is a genuine Graco replacement handle. Order it by part number to match the handle listed for your Graco gun.Features Genuine Graco machined handle Replace a damaged handle Ordered by Graco part number Specifications Part number: 16A037 Manufacturer: Graco...

The Graco 16G501 shutoff valve handle is the genuine replacement handle for the resin (RES) side shutoff valve. Order it by part number to match your Graco equipment's parts list.Features Genuine Graco valve handle Resin (RES / B) side Replace a cracked or missing...

The Graco 16H931 packing o-ring is listed as ref. 2B with the cartridge of the Graco Contractor PC airless spray gun. Keep spares on hand to reseal the cartridge when it starts to weep.Features Genuine Graco packing o-ring For the Contractor PC gun cartridge...

The Graco 16K136 valving rod is a genuine Graco replacement part. Order it by part number to match the valving rod called out in your Graco gun's parts list.Features Genuine Graco valving rod Ordered by Graco part number for an exact match Replace a...

The Graco 179733 seal sleeve (ref. 21) is used in every model of the Graco XTR5 and XTR7 airless spray guns, and in the newer XTR5+ and XTR7+ guns. It is a common replacement during XTR gun service.Features Genuine Graco seal sleeve Fits all...