Graco

The Graco 296831 air cap is the front-end cap of the Graco GX-7A air-purge plural-component spray gun. It threads over the front of the gun and holds the PCD retainer, PCD body and front packing in place.Features Genuine Graco GX-7A air cap Retains the...

The Graco 296971 spring is the air valve spring for the Graco GX-7A air-purge spray gun. Graco includes it in the GX-7 trigger valve rebuild kit (296897), and it is available here on its own for quick repairs.Features Genuine Graco GX-7A air valve spring...

The Graco 296978 front packing seals the front end of the Graco GX-7A air-purge spray gun, installed with the PCD body (296976) under the PCD retainer and air cap. Replace it whenever the front end is disassembled.Features Pack of 5 genuine Graco packings Seals...

The Graco 295868 o-ring is a genuine replacement seal for the Graco GX-7A air-purge spray gun used for spray foam and polyurea. Fresh o-rings at every teardown help prevent air and material leaks.Features Genuine Graco o-ring Restores a reliable seal Replace whenever the gun...

The Graco 296976 PCD body is a front-end component of the Graco GX-7A air-purge spray gun. It installs with the front packing (296978) and is held in place by the PCD retainer (296832) and air cap (296831).Features Genuine Graco GX-7A PCD body Front-end component...

The Graco 296832 PCD retainer holds the PCD body (296976) and front packing (296978) in the front end of the Graco GX-7A spray gun. It sits under the 296831 air cap.Features Genuine Graco GX-7A part Retains the PCD body and front packing Replace if...

The Graco 295680 two-position stop is a genuine replacement part for the Graco GX-7A air-purge spray gun. As the name suggests, it provides two set positions for the gun's travel stop.Features Genuine Graco GX-7A component Two-position design Replace if worn, damaged or missing Keep...

The Graco 243161 HandTite tip guard holds RAC V (RAC 5) reversible spray tips on Graco airless guns and can be tightened by hand.Always engage the trigger lock and follow Graco's Pressure Relief Procedure before servicing an airless gun or changing tips.Features HandTite design...

The Graco 246215 HandTite tip guard holds RAC X reversible SwitchTips on Graco airless spray guns and tightens by hand.Replacing worn gun parts restores clean shutoff and a consistent fan, reducing wasted material and touch-up work.Features Tool-free HandTite design Accepts RAC X SwitchTips Pair...

The Graco Heavy Duty Back-Geared Drum Agitator (238157) uses a heavy-duty gearbox to keep high-viscosity finishing materials thoroughly mixed in the drum. Features Leak-free, oil-less gearbox prevents material contamination Stainless steel agitator is corrosion resistant and waterborne compatible Twin paddles thoroughly mix finishing materials...

The Graco Integrated PowerStation has been discontinued by Graco, but ArmorThane still supplies parts, rebuild kits and service support for it. Machine not available – parts only.The PowerStation is a plug-and-play power unit for standard Reactor 2 proportioners, with a Tier 4 Final diesel...

The Graco King 30:1 Sprayer (K30FH1) is a complete air-powered airless package for protective coatings, pairing the XL3400 air motor with a 220cc Xtreme lower and integrated fluid filter on a heavy-duty cart. Features XL air motor with 50% fewer parts than the previous...

The Graco King 60:1 Sprayer (K60FH1) is a complete air-powered airless rig for high-build protective coatings, rated to 6000 psi and delivered ready to spray on a heavy-duty cart. Features XL6500 high-performance air motor: 50% fewer parts and 145% higher exhaust capacity for smoother...

The Graco King 90:1 Sprayer (K90FH1) combines the XL6500 air motor with a 145cc lower to reach 7250 psi, giving applicators the pressure needed for high-viscosity protective coatings. Features Redesigned poppets and external pilot lines virtually eliminate pilot valve freezing Up to 70% lower...

The Graco King E-Max XT 40:1 Electric Airless Sprayer, Protective Coatings Complete (2009106) brings King-class pressure to jobs where compressed air is limited, using a brushless electric XT motor instead of an air motor. Features High-torque, low-RPM brushless XT motor with a zero-maintenance design...

The Graco King E-Max XT 60:1 Electric Airless Sprayer, Protective Coatings Complete (2009108) brings King-class pressure to jobs where compressed air is limited, using a brushless electric XT motor instead of an air motor. Features High-torque, low-RPM brushless XT motor with a zero-maintenance design...

The Graco King E-Max XT 70:1 Electric Airless Sprayer, Protective Coatings Complete (2009110) brings King-class pressure to jobs where compressed air is limited, using a brushless electric XT motor instead of an air motor. Features High-torque, low-RPM brushless XT motor with a zero-maintenance design...

The Graco King E60 Heavy Duty Cart sprayer (273752) is an electric airless package for protective coatings, running on 120V/30A or 240V/20A single-phase power with no compressor required. Features 145cc Xtreme Duty lower with integrated filter Runs on a 5 kW (minimum) generator for...

The Graco King E70 Heavy Duty Cart sprayer (273746) is an electric airless package for protective coatings, running on 120V/30A or 240V/20A single-phase power with no compressor required. Features 115cc Xtreme Duty lower with integrated filter Runs on a 5 kW (minimum) generator for...

The Graco King PFP XL70-290 (24X069) is a cart-mounted single-component sprayer built for epoxy passive fire protection (PFP) coatings, pairing the Xtreme XL10000 air motor with a 290cc Xtreme lower and a ram feed. Features 5-gallon (18.9 L) dual-post ram provides downforce to feed...

The Graco LineDriver ES Lithium Ride-On Attachment (25U670) turns a walk-behind LineLazer, FieldLazer or GrindLazer into a ride-on, with quiet lithium power and precise speed control for consistent mil thickness.Features ExactMil speed control: set your speed for consistent lines SmartDrive regenerative braking and Eco-Mode...

The Graco LineDriver HD with Electric Start Ride-On Attachment (25U474) adds push-button starting to the heavy-duty LineDriver HD, so operators can ride their striper, ThermoLazer or GrindLazer without a pull cord.Features Electric start for fast, easy starts FlexBeam LED light system with retractable, breakaway...

The Graco LineDriver HD Ride-On Attachment (262005) is the heavy-duty, 6.5 HP ride-on for striping, thermoplastic and scarifying crews who want more power for heavier units and long days.Features FlexBeam LED light system with retractable, breakaway design Dual foot pedals for forward and reverse...