graco

The Graco 2001170 Fusion FX bolt is the manifold bolt for the Graco Fusion FX plural-component spray gun. It secures the fluid manifold to the gun; replace it if it is bent, stretched or has damaged threads.Features Genuine Graco Fusion FX manifold bolt Secures...

The Graco 2000975 Fusion FX manifold fluid valve kit includes two fluid valves for the Fusion FX hose manifold. These valves let you shut off the A and B materials at the gun, so worn or leaking valves should be replaced promptly.Features Two valves...

The Graco 2005366 Fusion FX MC seal kit contains ten mix chamber seals for the Graco Fusion FX spray gun. The seal sits at the mix chamber, and a worn seal can leak or let material bypass, so replacing it on a regular schedule...

The Graco FX52FL is the flat-pattern mix chamber for the Graco Fusion FX spray gun, with 0.051 in. impingement ports. Flat patterns are favored by many polyurea and coatings applicators for even film build on floors, walls and liners.Features Flat fan pattern for coatings...

The Graco FX20RD is the smallest round mix chamber for the Graco Fusion FX spray gun. Its 0.021 in. impingement ports and 0.043 in. nozzle suit low-output foam and coating work, touch-ups and detail spraying where control matters more than speed.Features Smallest FX round...

The Graco FX29RD round mix chamber brings the Graco Fusion FX gun into the low-to-moderate output range, with 0.031 in. impingement ports and a 0.053 in. nozzle. It is a practical size for smaller proportioners and applicators who want a manageable pattern.Features Low-to-moderate output...

The Graco FX37RD is a mid-size round mix chamber for the Graco Fusion FX spray gun, with 0.038 in. impingement ports and a 0.065 in. nozzle. Mid-size chambers are a common all-around choice for spray foam insulation work.Features Mid-range output for everyday foam work...

The Graco FX42RD round mix chamber for the Graco Fusion FX spray gun has 0.042 in. impingement ports and a 0.067 in. nozzle. It sits in the middle of the FX range, a step up in output from the FX37RD.Features Mid-range output a step...

The Graco FX47RD round mix chamber gives the Graco Fusion FX spray gun higher output, with 0.047 in. impingement ports and a 0.074 in. nozzle. It suits larger proportioners and production spray foam or polyurea work.Features Higher output for production spraying Round pattern Replace...

The Graco FX52RD round mix chamber for the Graco Fusion FX spray gun has 0.052 in. impingement ports and a 0.08 in. nozzle. It covers the upper-mid output range and works with Graco's larger extension tip cap for long-reach spraying.Features Upper-mid output range Round...

The Graco FX60RD round mix chamber is a high-output option for the Graco Fusion FX spray gun, with 0.057 in. impingement ports and a 0.087 in. nozzle. It is sized for large proportioners and big open areas.Features High output for large-area work Round pattern...

The Graco FX70RD is the largest round mix chamber for the Graco Fusion FX spray gun, with 0.061 in. impingement ports and a 0.0945 in. nozzle. It is meant for maximum-output spray foam and coatings work on high-capacity rigs.Features Largest FX round chamber for...

The Graco 2000981 Fusion FX muffler kit is listed in the Graco Fusion FX parts list as the breather plug in the handle (ref. 7b). Replace it when it is clogged, damaged or missing.Features Genuine Graco Fusion FX part Handle breather plug (ref. 7b)...

The Graco 119421 o-ring is used in several places on the Graco Fusion FX spray gun. Graco's parts list shows it in the CS piston assembly (three per assembly) and in the gun body (four), making it one of the most commonly replaced o-rings...

Graco 2006158 is a 5-pack of size 129 O-rings for the air piston assembly of the Graco Fusion FX plural-component spray gun (manual reference 2d).Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of normal...

The Graco 2005697 O-ring packing (5 pack) is a genuine replacement seal for the Graco Fusion FX plural-component spray gun, listed at reference 2c in the gun's piston assembly.Worn seals and O-rings are the most common cause of crossover, leaks and pattern problems on...

The Graco 2001307 Fusion FX o-ring repair kit bundles the assorted o-rings needed for routine maintenance on the Graco Fusion FX spray gun. Replacing o-rings as a set during scheduled service helps prevent air and fluid leaks that lead to downtime.Features Multiple o-ring sizes...

The Graco 2005699 O-ring 10 pack supplies genuine replacement O-rings for the piston assembly of the Graco Fusion FX spray gun (manual reference 2k).Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea...

The Graco 2001152 is a 10-pack of o-rings for the Graco Fusion FX plural-component spray gun (listed at refs. 2e and 9 in the FX parts list). A 10-pack is a practical way to keep spares on hand for crews spraying every day.Features Genuine...

Graco 2005698 is a 5-pack of genuine O-rings listed in the Graco Fusion FX spray gun parts breakdown, used when rebuilding the gun's rear piston section.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold valves.Features...

The Graco 2001150 is a 5-pack of o-rings for the Graco Fusion FX plural-component spray gun (listed at ref. 20 in the FX parts list). Replacing o-rings on schedule helps prevent air and fluid leaks.Features Genuine Graco o-rings Pack of 5 For the Fusion...

Graco 25M239 is a bulk 50-pack of O-rings listed in the Graco Fusion FX spray gun parts breakdown, sized for shops that rebuild guns often.Before servicing any Fusion gun, follow the Pressure Relief Procedure in the Graco manual and close the manifold valves.Features Fifty...

The Graco Fusion FX Polyurea Gun (FX9011) is the lightest, smallest and most balanced gun in the Fusion family, purpose-built for polyurea. It ships with round mix chambers in sizes 0.029, 0.034 and 0.037.Features 30% lighter and 9× better balanced than the Fusion PC...