Shop All

This 3/8 in x 1/4 in Black Iron Reducer steps a 3/8 in pipe connection down to 1/4 in. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray trailer.Features...

ArmorThane's 3/8 in Black Iron 90° Street Elbow makes a tight 90-degree turn directly off a 3/8 in threaded port. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray...

Use this 5/8 in O-Clamp, Zinc Plated when a job calls for a part that secures 5/8 in hose on barbs and fittings. Use it wherever flexible hose slips over a barb or fitting. Keep a supply on hand for hose repairs.Features Holds hose...

Use this 1/2 in x 1/4 in Black Iron Bushing when a job calls for a part that reduces a 1/2 in female port down to a 1/4 in connection. Use it on air, tank and pump plumbing in the shop or on a...

ArmorThane's 1/4 in QD Nipple x 3/8 in Hose Barb puts a 1/4 in quick-disconnect plug on the end of 3/8 in hose. It makes swapping hoses and tools faster in the shop and in the field. Use it to add quick-connect points to...

ArmorThane's 1/4 in Female QD Coupler provides a 1/4 in female quick-connect socket for air lines. It makes swapping hoses and tools faster in the shop and in the field. Use it to add quick-connect points to compressors, air tools and air supply lines.Features...

ArmorThane's 3/4 in Black Iron Pipe Nipple joins two 3/4 in female-threaded fittings. Use it on air, tank and pump plumbing in the shop or on a spray trailer. It is a basic building block for rig plumbing, air manifolds and tank connections.Features Kept...

Use this 3/8 in Black Iron Close Nipple when a job calls for a part that joins two 3/8 in female-threaded fittings as close together as possible. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on...

This 3/4 in x 3/4 in Hose Barb Coupler splices two lengths of 3/4 in hose together. It pairs with a hose clamp for a secure hose connection. Use it with flexible hose on transfer, drain and air lines.Features Barbed end grips the inside...

This 1/2 in Full Port Ball Valve shuts off or isolates a 1/2 in line with a quarter turn. It is useful at tank outlets, pump inlets and supply lines. Install it to shut off or isolate part of a plumbing run.Features Useful for...

The 3/4 in x 1/2 in Black Iron Bushing reduces a 3/4 in female port down to a 1/2 in connection. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a...

Use this 3/8 in Black Iron Pipe Locknut when a job calls for a part that locks a 3/8 in threaded pipe or fitting in place through a panel or tank wall. Keep spares on hand for repairs and new builds. Use it on...

This 3/4 in Black Iron 90° Street Elbow makes a tight 90-degree turn directly off a 3/4 in threaded port. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray...

Use this 3/4 in Full Port Ball Valve when a job calls for a part that shuts off or isolates a 3/4 in line with a quarter turn. Install it to shut off or isolate part of a plumbing run. It is useful at...

ArmorThane's 3/4 in Black Pipe Tee splits or joins a 3/4 in pipe run three ways. Keep spares on hand for repairs and new builds. Use it on air, tank and pump plumbing in the shop or on a spray trailer.Features Suited to compressed-air...

This 1/4 in Brass Forged 90° Elbow turns a 1/4 in threaded line 90 degrees. Use it where a small, corrosion-resistant fitting is needed. It is a good fit for air manifolds, gauges and compact fluid plumbing.Features Stocked by ArmorThane with its air and...

ArmorThane's 2 in x 3/4 in Black Iron Bushing reduces a 2 in female port, such as a drum or tank bung, down to 3/4 in. It is a basic building block for rig plumbing, air manifolds and tank connections. Keep spares on hand...

Use this 3/8 in Compression x 1/4 in MPT Brass Connector when a job calls for a part that connects 3/8 in tubing to a 1/4 in female pipe port. It works well on tubing for air, gauge and small fluid lines. Use it...

The 1/4 in JIC x 1/4 in MPT Steel Connector adapts a 1/4 in JIC connection to a 1/4 in female pipe-thread port. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in the fluid plumbing of...

Use this 3/8 in Hose Barb Coupler when a job calls for a part that splices two lengths of 3/8 in hose together. Use it with flexible hose on transfer, drain and air lines. It pairs with a hose clamp for a secure hose...

ArmorThane's 1/2 in Hose Barb x 3/4 in MPT connects 1/2 in flexible hose to a 3/4 in female-threaded port. It pairs with a hose clamp for a secure hose connection. Use it with flexible hose on transfer, drain and air lines.Features Useful for...

The 3/4 in Black Iron Pipe Cross joins four 3/4 in pipe runs at one point. Use it on air, tank and pump plumbing in the shop or on a spray trailer. It is a basic building block for rig plumbing, air manifolds and...

ArmorThane's 3/8 in Swivel Hose Barb Coupler connects 3/8 in hose with a swivel that helps keep the hose from kinking or twisting. It pairs with a hose clamp for a secure hose connection. Use it with flexible hose on transfer, drain and air...