Parts & Rebuild Kits

Amaano 248130-D supplies side seal housing o-rings for the side seal housing on Graco Fusion AP guns, ready for scheduled rebuilds. Features Matches the Graco Fusion AP side seal housing position (Graco part 248130) Field-tested by spray foam contractors in addition to lab testing,...

Graco 248131 is a pack of front O-rings for the Graco Fusion AP air-purge spray gun, used at the gun's front end / air cap area.Plural-component guns see heat, pressure and isocyanate exposure every day, so scheduled replacement of wear parts is part of...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Teflon Air Cap O-Ring, Reusable (248137-R), made for the gun's air cap. Features Matches the Graco Fusion AP air cap position (Graco part 248137) Field-tested by spray foam contractors in addition to lab...

Graco 248860 is the thread insert kit for the Graco Fusion AP air-purge spray gun, used to repair threads in the fluid housing.Rebuilding with genuine Graco parts keeps factory tolerances in the gun, which matters for mix quality in spray foam and polyurea work.Features...

Graco 248137 is a package of 6 PTFE O-rings for the Graco Fusion AP air-purge spray gun, sealing the air cap.Crews that spray foam or polyurea daily typically keep a stock of Fusion wear parts in the rig to avoid losing a day to...

The Graco 15B689 grease fitting cover snaps over the grease fitting on Graco Fusion AP and Fusion PC plural-component spray guns (ref. 37). Keeping the fitting covered helps keep overspray and debris out, so the gun can be greased properly at the end of...

The Graco 15B210 air cap is the front air cap used on round-pattern Graco Fusion AP and Fusion PC plural-component spray guns (ref. 10). It fits over the mix chamber at the front of the gun and is a common replacement when the cap...

Keep your Fusion AP gun sealing properly with the Amaano Amaano Fluid Block O-Ring, Disposable (248131-D), made for the gun's fluid block. Features Matches the Graco Fusion AP fluid block position (Graco part 248131) Field-tested by spray foam contractors in addition to lab testing,...

The Graco 15B211 retaining ring is the front retaining ring on the Graco Fusion AP air-purge plural-component spray gun (ref. 9). It holds the front-end components in place and is removed during mix-chamber and air-cap service.Features Genuine Graco retaining ring Fits the Fusion AP...

The Hose Barb Fitting connects flexible hose to a fitting or port. Use it with flexible hose on transfer, drain and air lines. It pairs with a hose clamp for a secure hose connection.Features Barbed end grips the inside of flexible hose Secure the...

The Hose Barb x FPT Adapter connects flexible hose to a male-threaded fitting. Use it with flexible hose on transfer, drain and air lines. It pairs with a hose clamp for a secure hose connection.Features Useful for transfer, recirculation, drain and air lines Stocked...

Use this 1/8 in FPT to 1/4 in MPT Adapter when a job calls for a part that connects a 1/8 in male-threaded part to a 1/4 in female-threaded port. Use it on air, tank and pump plumbing in the shop or on a...

This 3/8 in Tube Female Swivel 90° Elbow makes a 90-degree turn on a 3/8 in tube line with a female swivel end. Use it where tubing needs to connect to threaded ports or to other tubing. It works well on tubing for air,...

This 5/16 in JIC x 1/4 in MPT Coupler adapts a 5/16 in JIC connection to a 1/4 in female pipe port. It is a common piece in the fluid plumbing of spray rigs and transfer systems. Keep a few on hand for hose...

The 5/16 in JIC Coupler joins 5/16 in JIC connections. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in the fluid plumbing of spray rigs and transfer systems.Features Stocked with the hoses and fittings ArmorThane uses...

The ArmorThane 1/2" x 3/8" BI reducer coupling connects 1/2" and 3/8" threaded pipe in one black iron fitting.Features Black iron (BI) construction Steps 1/2" down to 3/8" Threaded coupling Specifications Material: Black iron Size: 1/2" x 3/8" Type: Reducer coupling Stock number: FIT303...

The ArmorThane 1/2" x 1/4" BI reducer coupling joins a 1/2" pipe to a 1/4" pipe. BI denotes black iron construction.Features Black iron (BI) Reduces from 1/2" to 1/4" Female-threaded coupling Specifications Material: Black iron Size: 1/2" x 1/4" Type: Reducer coupling Stock number:...

The Female Quick Disconnect x 1/4 in MPT adds a female quick-disconnect socket to a 1/4 in female pipe port. Use it to add quick-connect points to compressors, air tools and air supply lines. It makes swapping hoses and tools faster in the shop...

Use this 1/2 in MPT Brass Hex Nipple when a job calls for a part that joins two 1/2 in female-threaded parts, with a hex center for wrenching. It is a good fit for air manifolds, gauges and compact fluid plumbing. Use it where...

Use this 3/4 in MPT Steel Hex Nipple when a job calls for a part that joins two 3/4 in female-threaded parts, with a hex center for wrenching. Keep spares on hand for repairs and new builds. Use it on air, tank and pump...

The 3/4 in JIC Male x 3/4 in JIC Female Swivel 45° Elbow adds a 45-degree bend between 3/4 in JIC connections, with a swivel female end. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in...

ArmorThane's 3/4 in MPT x 3/4 in JIC Male Adapter adapts a 3/4 in female pipe port to a 3/4 in JIC male connection. Use it when plumbing hoses to pumps, manifolds and fluid-handling components. It is a common piece in the fluid plumbing...

The Brass Coupler, 3/4 in FWH x 3/4 in MPT adapts a 3/4 in female hose-thread connection to a 3/4 in male pipe thread. It is a good fit for air manifolds, gauges and compact fluid plumbing. Use it where a small, corrosion-resistant fitting...